What is recorded for GNE27JYMFS
GE GNE27JYMFS — Weights Dimensions Overall Width: 35.75 in; Weights Dimensions Overall Height: 69.875 in; Weights Dimensions Overall Depth: 35.875 in; Net Weight: 308 lb; Approximate Shipping Weight: 332.2 lb.
Manufacturer sources
GE GNE27JYMFS
Delivery & moving
Refrigerator · US market · 45 owner topics
GE GNE27JYMFS French-door refrigerator
Covers GNE27JYMFS and the manufacturer-listed models in this family.
Specifications & model details
GNE27JYMFS: model-specific checks
Use these measurements for the first comparison
For GE GNE27JYMFS, start with weights dimensions overall width 35.75 in, weights dimensions overall height 69.875 in, weights dimensions overall depth 35.875 in. Preserve those labels when comparing an opening or delivery route. Any handle/hinge allowances, clearances and adjustment ranges that the source does not establish remain additional checks.
Clearances explicitly recorded by GE
The exact source lists Top Air Clearances: 1 in, Side Air Clearances: 1/8 in, Back Air Clearances: 2 in. Keep these requirements separate from the product’s body dimensions and check all remaining installation conditions in the linked guide.
Plan a refrigerator move around food safety, removable interior parts, the route and lifting method, and any connected water line. Follow the exact model’s transport and restoration instructions, then verify food-safe temperatures before restocking perishables.
Owner guide: Delivery & moving
Category & symptom guidance
Delivery & moving
Move food before the appliance
Plan where refrigerated and frozen food will go before the refrigerator is unplugged or moved. Use another working refrigerator or freezer, or insulated carriers that keep food cold. The FDA advises keeping a refrigerator at or below 40°F and a freezer at 0°F; use appliance thermometers to check the destination storage rather than relying on how cold it feels.
Separate perishables from shelf-stable food and limit the time they spend outside cold storage. If you cannot keep food within safe conditions, make a food safety decision using FDA guidance rather than taste or smell. Note any temperature readings and how long food was without reliable refrigeration so you can make a careful decision afterward.
- Arrange cold storage or insulated carriers before moving day.
- Use thermometers to check the receiving refrigerator and freezer.
- Track time and temperature for food that leaves controlled storage.
Empty and secure the interior
Remove food, loose containers, and any removable shelves or door bins that could shift. Check the manual to see which pieces are intended to come out and how to handle them. Wrap and label removed parts so they can be returned to their original positions. Secure any parts that must remain in place using a method allowed by the manufacturer; avoid adhesive or tape on finished surfaces unless the manual permits it.
Close and secure doors for the move only as the moving plan and manufacturer instructions allow. Do not use handles or shelves as lifting points. If an interior part is stuck, cracked, or unclear, ask the mover or manufacturer before forcing it.
- Empty the cabinet and remove loose items.
- Protect and label manual-approved removable pieces.
- Agree on a door and interior securing method with the movers.
Measure the route and protect surfaces
Measure the refrigerator and the full route, including doorways, turns, stairs, landings, and elevator openings. Include the space needed to maneuver a dolly and the room to keep people clear. Tell the delivery team about tight turns, floor transitions, or stairs before they arrive so they can decide whether the planned equipment and crew are suitable.
Protect floors and nearby finishes with coverings appropriate for the surface, and clear obstacles from the route. Do not assume that a refrigerator can be safely carried by one person or tipped to clear an opening. Use a properly sized appliance dolly and trained movers for lifting and handling; follow their method and the appliance instructions.
- Measure the appliance and each narrow route point.
- Clear the path and identify floor or wall protection needs.
- Confirm the mover has suitable equipment and enough trained people.
Address water and transport instructions
Before moving a refrigerator with a water connection, identify the shutoff and arrange for the line to be disconnected by someone qualified. Do not pull the appliance away while the line is attached or stretched. A visible ice or water feature does not tell you how to disconnect its plumbing; use the exact model manual and the installer’s guidance.
Check the manual for required transport position, handling, and any restoration steps after the move. Do not apply a universal waiting period or assume that one model’s instructions fit another. If the manual is unavailable, find it through the manufacturer’s official model support or ask the delivery team to defer movement until the requirement is confirmed.
- Tell the movers whether a water line is connected.
- Arrange qualified disconnection before the appliance is moved.
- Find the exact model’s transport and post-move instructions.
Restore and recheck food safety
After positioning, follow the model’s setup instructions for leveling, connection, and any stated restoration period. Use a refrigerator thermometer and freezer thermometer to verify the storage spaces reach the FDA guidance of 40°F or below and 0°F, respectively, before loading perishables. Do not use a display reading or a cold interior surface as a substitute for an independent thermometer.
Check the door closes as intended and inspect any reconnected water line for visible moisture. If temperatures are not at safe levels, keep food in alternate cold storage and consult the manual or manufacturer. Record readings and times; a quick check right after plugging in may not show settled storage conditions.
- Complete the exact manual’s restoration steps.
- Verify refrigerator and freezer temperatures with thermometers.
- Keep perishables elsewhere until safe storage temperatures are confirmed.
What to do with what you find
The destination refrigerator and freezer measure at or below 40°F and 0°F, respectively, and the doors close normally.
The measured compartments meet the FDA temperature guidance at the time checked.
Either compartment is warmer than its FDA guidance after the manual’s applicable restoration instructions.
The appliance is not yet providing the target food-storage temperature, and perishables may be at risk.
The refrigerator is still connected to water, or moisture appears after reconnection.
Moving or operation could strain a line or cause water damage.
Have these details ready
- Food transfer plan and temperature readings.
- Exact model manual with transport and restoration instructions.
- Route measurements and moving crew/equipment plan.
- Confirmation of water disconnection and post-move visible leak check.
Common questions
Can I use a fixed waiting time before putting food back?
Use the exact model’s restoration instructions and thermometer readings. There is no universal waiting time that applies to every refrigerator.
When are the compartments cold enough for food?
The FDA guidance is 40°F or below for the refrigerator and 0°F for the freezer, verified with thermometers.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- www.geappliances.com/ge/service-and-support/refrigerators-freezers.htm
- ask.fsis.usda.gov/article/How-do-you-know-the-temperature-of-your-refrigerator
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Approximate Shipping Weight | 332.2 lb | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Approximate Shipping Weight. Observed Oct 26, 2026 |
| Back Air Clearances | 2 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Back Air Clearances. Observed Oct 26, 2026 |
| Case Depth Without Door | 29 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Case Depth Without Door. Observed Oct 26, 2026 |
| Depth Without Handle | 33.375 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Depth Without Handle. Observed Oct 26, 2026 |
| Depth with Door Open 90° | 43.75 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Depth with Door Open 90°. Observed Oct 26, 2026 |
| Height to Top of Case | 68.625 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Height to Top of Case. Observed Oct 26, 2026 |
| Height to Top of Hinge | 69.75 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Height to Top of Hinge. Observed Oct 26, 2026 |
| Net Weight | 308 lb | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Net Weight. Observed Oct 26, 2026 |
| Overall Depth with Handle | 35.875 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Overall Depth with Handle. Observed Oct 26, 2026 |
| Side Air Clearances | 1/8 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Side Air Clearances. Observed Oct 26, 2026 |
| Top Air Clearances | 1 in | ManufacturerGE — GNE27JYMFS Exact-model manufacturer resource; specification fields Exact SKU GNE27JYMFS; manufacturer specification label: Top Air Clearances. Observed Oct 26, 2026 |
| Weights Dimensions Overall Depth | 35.875 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU GNE27JYMFS; https://www.geappliances.com/appliance/GE-ENERGY-STAR-27-0-Cu-Ft-Fingerprint-Resistant-French-Door-Refrigerator-GNE27JYMFS Manufacturer storefront primary SKU GNE27JYMFS; exact source field: spec_weights_dimensions_overall_depth Primary source: https://www.geappliances.com/appliance/GE-ENERGY-STAR-27-0-Cu-Ft-Fingerprint-Resistant-French-Door-Refrigerator-GNE27JYMFS Observed Oct 30, 2026 |
Sources for GNE27JYMFS
GE Appliances and LG current manufacturer product records Observed Oct 30, 2026
GE GNE27JYMFS owner’s manual Observed Oct 27, 2026
GE GNE27JYMFS product page Observed Oct 27, 2026
GE — GNE27JYMFS Observed Oct 26, 2026
Suggest a correction