What is recorded for GE24STACK
GE GE24STACK — Weights Dimensions Overall Width: 6.30 in; Weights Dimensions Overall Depth: 4.90 in.
Manufacturer sources
GE GE24STACK
Accessories & installation kits
Clothes dryer · US market · 44 owner topics
GE dryers
Specifications for GE24STACK with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
GE24STACK: model-specific checks
Use these measurements for the first comparison
For GE GE24STACK, start with weights dimensions overall width 6.30 in, weights dimensions overall height 2.40 in, weights dimensions overall depth 4.90 in. Preserve those labels when comparing an opening or delivery route. Any handle/hinge allowances, clearances and adjustment ranges that the source does not establish remain additional checks.
Choose dryer accessories by exact model, vent route, installation layout, and required utility connection rather than by appearance.
Owner guide: Accessories & installation kits
Category & symptom guidance
Accessories & installation kits
Match the accessory to the installation task
First identify what the accessory must do: connect the exhaust in a permitted direction, raise the dryer, stack it with a washer, support rack drying, or convert an appliance configured for a different gas type. These are different jobs and the items are not interchangeable. Measure the available width, depth, height, door swing, utility locations, and the route to the exterior vent. Include the dryer’s door-open depth and the access needed to move it into place.
A product specification may list options, but that list applies to its stated models. LG’s DLEX4000/DLGX4001 sheet, for example, lists a side venting kit and different vent directions for electric and gas versions. The LG DLEX5500/DLGX5501 specification likewise identifies particular kits and dimensions. Those references are examples only; use the sheet or installation instructions matching the appliance’s complete model.
- Name the installation problem before shopping for a kit.
- Measure the actual opening, route, and clearance with the door open.
- Compare the full model identifier against model-specific installation documentation.
Vented dryers: plan the exhaust route
For a vented dryer, verify where the exhaust outlet sits and whether the proposed route exits through the rear, side, or bottom as the exact model permits. A side vent kit changes the route; it does not make every path acceptable or cure a long, crushed, or lint-restricting duct. Check the installation guide for allowed direction, clearances, duct material, and routing limits. Do not infer these requirements from another brand’s diagram or a kit that merely appears to fit.
Gas and electric versions can have different permitted venting directions. The LG 4000 family sheet states electric four-way and gas three-way venting, a scoped detail that should not be transferred to other families. If the existing wall outlet does not align, have the installer verify the approved configuration before purchase. A condenser or heat-pump dryer may not use an exhaust duct at all; confirm the design before buying vent hardware.
- Trace the intended exhaust route to its outdoor termination.
- Confirm the route and kit are permitted for the exact gas/electric model.
- For condenser or heat-pump designs, follow their drainage and airflow requirements rather than vented-dryer assumptions.
Stacking, pedestals, and drying racks
A stacking kit must be approved for both the dryer and the washer below it. Confirm the washer model, dryer model, kit number, and installation instructions as one set; similar cabinet width is not proof of secure fit. LG’s 4070 sheet names KSTK1 for that older family, while its 5500 sheet names KSTK4. These distinct examples show why a kit number should not be carried across model generations. A pedestal is likewise tied to a compatible appliance base and can change the total height and door access.
A drying rack is a separate accessory from a stacking support. Verify that the rack is listed for the exact dryer and learn which cycles or fabrics are allowed by that dryer’s manual. It is intended for items that should remain stationary rather than tumble, where the model instructions permit it. Do not improvise a rack from another appliance.
- Confirm both appliance model numbers and the exact stacking kit listing.
- Account for combined height, ceiling clearance, and controls access.
- Verify rack compatibility and operating instructions for the exact dryer.
Gas conversion and supplied connections
Treat gas conversion as a model-specific installation task. A listing for an LP conversion kit does not mean the appliance is already configured for LP, that conversion is allowed at the location, or that the owner should perform it. Confirm the exact dryer, fuel supply, required kit, local requirements, and installer qualifications before ordering. Never operate a gas dryer with uncertain fuel configuration or attempt adjustment to the gas system yourself.
Some models include a connection accessory while others require a separate item; verify the carton contents and installation requirements rather than assuming a Y connector, cord, or vent piece is present. Have the installer identify the needed connection parts before delivery when possible. For any accessory, retain the packaging and receipt until fit is confirmed, and do not force a connector or modify an accessory to make it fit.
- Verify fuel type and model-specific conversion documentation with the installer.
- Confirm included accessories and any separately required connection items.
- Keep receipts and return packaging until the installed fit is established.
What to do with what you find
The dryer’s exhaust outlet and wall opening do not align.
A permitted direction-change kit may be relevant, but route limits and model approval still govern.
A retailer lists a stacking kit by brand or width only.
Compatibility with the specific washer and dryer pair is unproven.
Have these details ready
- Dryer and washer complete model numbers
- Measurements and utility/vent route
- Accessory part number and exact compatibility statement
- Installation guide for the appliance variant
Common questions
Can a vent kit listed for an electric dryer be used with its gas sibling?
Do not assume so. LG’s DLEX4000/DLGX4001 specification sheet lists different venting options for electric and gas variants; verify the exact model instructions.
Does a dryer kit advertised for one LG family establish fit for another?
No. LG’s DLEX4000/DLGX4001 specification sheet lists a specific stacking kit; confirm fit for the complete model pair, so confirm the complete model pair and accessory number.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- www.lg.com/us/support/products/documents/DLEX4000_%20DLGX4001_%20Spec%20Sheet.pdf
- www.lg.com/us/support/product/lg-DLEX4000W.ABWETUS?tab=1
- www.energy.gov/cmei/buildings/consumer-clothes-dryers
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Exact listed model code | GE24STACK | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU GE24STACK; https://www.geappliances.com/appliance/GE-Washer-Dryer-24-Stack-Bracket-Kit-GE24STACK Primary source: https://www.geappliances.com/appliance/GE-Washer-Dryer-24-Stack-Bracket-Kit-GE24STACK Observed Oct 30, 2026 |
| Manufacturer first distribution date | 2009-09-21 | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU GE24STACK; https://www.geappliances.com/appliance/GE-Washer-Dryer-24-Stack-Bracket-Kit-GE24STACK Explicit product_first_distribution_date in exact OEM primary SKU record; not a manufacturing year or import date. Primary source: https://www.geappliances.com/appliance/GE-Washer-Dryer-24-Stack-Bracket-Kit-GE24STACK Observed Oct 30, 2026 |
Sources for GE24STACK
GE Appliances and LG current manufacturer product records Observed Oct 30, 2026
Suggest a correction