What is recorded for LBW243
Summit LBW243 — Reported width: 23.4 in.
Product photo not available
Public catalog
Summit LBW243
Delivery & moving
Washing machine · US market · 48 owner topics
Summit Front Load washers
Specifications for LBW243 with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
LBW243: model-specific checks
Use these measurements for the first comparison
For Summit LBW243, start with reported width 23.4 in. Preserve those labels when comparing an opening or delivery route. Any handle/hinge allowances, clearances and adjustment ranges that the source does not establish remain additional checks.
Prepare the washer for transport with the product-specific restraint, water and drain precautions, adequate help, and careful protection of hoses and cord.
Owner guide: Move and store a washer safely
Category & symptom guidance
Move and store a washer safely
Plan the move before disconnecting
Read the washer’s moving or installation instructions before the move date. Identify the transport restraint required for the exact product and locate any saved parts. Front-load and top-load washers may use different stabilization methods; do not assume shipping bolts from a front-load manual apply to a top-load machine. If the original restraint is missing, ask the manufacturer or mover what approved procedure applies.
Arrange adequate help and a route that avoids stairs or turns beyond the moving team’s capability. Manufacturer guidance for the LG WM4000H*A calls for two or more people to move or install the appliance. Have a qualified installer handle disconnection if you cannot safely reach the shutoffs or the washer is hard-wired or otherwise unlike the documented setup.
Prepare water and power safely
Before moving, stop the washer and follow the manual’s procedure to disconnect supplies. Close water valves, protect the floor from residual water, and arrange hoses so they do not snag or spill. Unplug by gripping the plug, not pulling the cord, and keep the cord secured away from pinch points. If water remains in a pump or hose, the product manual may call for a particular draining method or service assistance.
Do not open panels or reach into energized areas to drain a washer. If the unit has been exposed to standing water or shows cord damage, do not move it while attempting to operate it. Ask qualified service personnel for guidance on safe handling.
Install transport protection
Use the restraint and packing guidance in the exact washer’s installation instructions. For the LG WM4000H*A front-load example, the manual instructs owners to save the shipping bolt assemblies and warns against transport without reinstalling them. That procedure is for the named family; a different top-load design may require a different stabilizer or packing approach.
Secure hoses, cord, and loose accessories so they cannot drag or strike the cabinet. Protect the finish and keep the washer upright unless its manufacturer provides a specific alternative. If the appliance must be tilted for packaging removal or a tight route, follow the model’s instructions and use suitable help; do not lay it on a side or face based on another washer’s directions.
Reinstall and inspect at the destination
At the new location, remove transport restraints exactly when the installation guide directs and save them for the next move. Reconnect and route hoses according to the model instructions, level the washer, and perform the specified initial check. Do not run a front-load washer with shipping bolts still installed; do not assume a top-load machine is ready merely because it has no visible bolts.
For storage, protect the washer from freezing and outdoor weather as directed by its manual. Close water supplies when it will be unused for an extended period if the manufacturer recommends it, and address residual water before freezing conditions. If the washer arrives with visible damage, a loose drum or tub beyond expected movement, or leaks after reconnection, stop and contact the retailer or manufacturer.
What to do with what you find
The exact transport restraint is missing or the manual’s moving instructions are unavailable.
The washer may be damaged in transit if moved without its approved stabilization method.
After relocation, the washer vibrates excessively or leaks during the initial check.
The unit may be unrestrained, unlevel, or incorrectly reconnected.
Have these details ready
- Exact moving and installation instructions
- Approved transport restraint and safe moving route
Common questions
Can I use front-load shipping bolts on a top-load washer?
No. Use only the transport restraint specified for the exact model and design.
Should I keep the shipping restraints after installation?
Yes, if the manual directs you to retain them; they may be required for a future move.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- media.us.lg.com/m/6d5d734b0871fbdf/original/WM4000_Owners-Manual.pdf
- images.salsify.com/image/upload/s--4zVee-ir--/44e1044e71329cd6678e18edc3950e53c5694077.pdf
- images.salsify.com/image/upload/s--dBhUJ9s5--/3f58f84eaa9d207a6fdadfa3a955c70b28005ee2.pdf
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Reported width | 23.4 in | CertificationENERGY STAR — Washing machines washers.csv; row 290; ENERGY STAR ID 3942868 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Load configuration | Front Load | CertificationENERGY STAR — Washing machines washers.csv; row 290; ENERGY STAR ID 3942868 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
Sources for LBW243
ENERGY STAR — Washing machines Observed Oct 31, 2026
Suggest a correction