What is recorded for LBW243
Summit LBW243 — Reported width: 23.4 in.
Product photo not available
Public catalog
Summit LBW243
Dimensions & fit
Washing machine · US market · 48 owner topics
Summit Front Load washers
Specifications for LBW243 with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
LBW243: model-specific checks
Use these measurements for the first comparison
For Summit LBW243, start with reported width 23.4 in. Preserve those labels when comparing an opening or delivery route. Any handle/hinge allowances, clearances and adjustment ranges that the source does not establish remain additional checks.
Plan for the washer cabinet, delivery path, hookups, door or lid movement, and service access before committing to a location.
Owner guide: Measure washer dimensions and fit
Category & symptom guidance
Measure washer dimensions and fit
Measure the room and route
Measure the opening at its narrowest points, including doorways, hall turns, stair landings, and the final location. Note baseboards, trim, cabinets, handles, and protruding valves that reduce usable width or depth. Delivery teams need a route that accommodates the washer’s packaged or unboxed size as well as safe maneuvering space; confirm those requirements with the retailer.
At the installation spot, measure width, depth, and height. Include the space needed for hoses, drain routing, airflow, and any manufacturer-required side or rear clearances. A washer that fits between cabinets may still be too deep once connections are made or may project into a walkway. Do not assume a product listing’s cabinet depth includes hose bends, control panels, or an open door.
Account for loading and opening
The opening direction changes how people use the space. A front-load washer needs room for its door to swing and for a person to load and unload without blocking a doorway. A top-load washer needs overhead clearance to raise the lid fully and room to reach the basket. Check nearby shelves, counters, faucets, and dryer doors in their actual positions.
For a side-by-side pair, check whether doors can open without striking each other or a wall. For a stacked arrangement or pedestal, use only combinations the manufacturer approves and follow the accessory instructions. Drawers and service access may need additional room; a drain pan or other accessory can change the installation in ways the manual specifies.
Use the exact document dimensions
Look up the model-specific dimensional drawing and distinguish the appliance dimensions from the installation clearances. Product sheets may show a side or rear view, but they can direct buyers to the installation instructions for current measurements. The manual may include clearance envelopes for a floor installation, stacking arrangement, or accessory setup. Measure against the relevant arrangement rather than applying one drawing to every setup.
A clearly named example: the GE PTWN6250M quick specification sheet includes dimensions for that named model. Its figures do not establish dimensions for another GE top-load washer. Likewise, the dimensions shown in the LG WM4000H*A manual apply to that exact front-load family and its stated configuration; they should not be generalized to other front-load units.
Check the floor and final position
A washer needs a floor and location that meet its installation instructions. A flexible or sloped surface can contribute to movement, vibration, and noise, and soft coverings may be unsuitable. Check for a firm support and note whether the proposed position leaves the washer levelable. Do not solve a clearance problem by crushing hoses behind the cabinet or blocking an opening required for airflow.
Before delivery, confirm the route, service access, and connections with the installer or retailer. If the measurements are close, have them verify the actual product dimensions and delivery plan. Delay installation if the appliance must be forced through a passage, cannot sit stably, or would obstruct required access.
What to do with what you find
The delivery route or final opening is narrower than the exact washer’s documented dimensions or required maneuvering clearance.
Delivery may damage the appliance or the home, or fail outright.
The washer fits the cabinet opening but its door or lid cannot open fully.
Routine loading or safe access will be difficult.
Have these details ready
- Exact model dimensional drawing and installation clearances
- Measured delivery route and final location
Common questions
Should I measure only the washer cabinet?
No. Include hookup space, manufacturer clearances, delivery access, and room for a front-load door or top-load lid.
Can a dimension drawing for a similar model confirm fit?
No. Use the exact model’s current dimensional and installation documents.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- images.salsify.com/image/upload/s--Edn1DoGr--/a9306ad65159a89d3d24de6f8d543a6cc158b6b2.pdf
- media.us.lg.com/m/6d5d734b0871fbdf/original/WM4000_Owners-Manual.pdf
- images.salsify.com/image/upload/s--dBhUJ9s5--/3f58f84eaa9d207a6fdadfa3a955c70b28005ee2.pdf
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Measurements in the source
| Specification | Recorded value | Evidence |
|---|---|---|
| Reported width | 23.4 in | CertificationENERGY STAR — Washing machines washers.csv; row 290; ENERGY STAR ID 3942868 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
Check whether each value describes the cabinet, overall product, or opening. Required clearances and door movement must come from the exact installation guide.
Open the fit checklistSources for LBW243
ENERGY STAR — Washing machines Observed Oct 31, 2026
Suggest a correction