Midea MAD50PS1BQGR
Source model name: Dehumidifiers
Dehumidifier · US market · 41 owner topics
Specifications for MAD50PS1BQGR with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
Midea MAD50PS1BQGR is rated at 49.67 pints/day. This is removal over a day under the source test conditions, not the size of its bucket or an expected amount in every room. Compare room humidity, temperature, run time and whether collected water is staying in the bucket or leaving through a permitted drain. Different test standards must be reconciled before comparing pint ratings.
Capture the exact display and the unit’s behavior, then use the manual for the exact model to distinguish operating indicators from fault codes.
Category & symptom guidance
A symbol or short message has meaning only in the context of the exact dehumidifier model. Before resetting or unplugging the unit, write down the text exactly, sketch the icon, or take a clear photo. Record whether the display flashes, stays steady, or alternates with a number. Also note whether the fan continues, the compressor seems to cycle, the unit stops, or water collection changes. These observations help support staff identify the display without guessing. Do not infer a meaning from a code list for a different brand or model. If the display changes after a control action, record the original indication and what action preceded the change.
Many displays report ordinary conditions, such as a full bucket, a filter reminder, defrost activity, or humidity control reaching its target. Those indications do not automatically mean a component has failed. Check the manual’s indicator section and compare the icon shape, wording, and operating response with your observation. A full-bucket message paired with a full or mis-seated bucket points toward collection setup; a filter reminder may call for accessible filter care. A defrost indication may describe a temporary operating cycle. Only the exact manual can establish whether a given display is a status message or a fault code. If the manual does not list it, preserve the wording and ask the manufacturer.
If a bucket-related indicator appears, inspect whether the bucket is full and whether it is seated as described in the manual. Empty it if needed, reinstall it, and see whether the message clears. If the indicator remains with an empty, correctly seated bucket, record that result rather than repeatedly cycling power. For a filter reminder, inspect only the user-accessible filter and clean it according to the manufacturer’s instructions. The reminder may be based on elapsed use rather than a sensor reading, depending on the model. Reset a reminder only by the documented method after completing the specified maintenance. Avoid invented button sequences: controls and reset procedures vary.
A humidity reading or target indicator can explain why the appliance is resting or cycling. Compare the displayed room humidity with the selected target, if both are shown, and consult the manual for how the controls behave. A defrost symbol or message can indicate a temporary pause in moisture removal. Follow the model’s stated defrost directions and allow the process to finish; do not scrape ice or open panels. Record whether the indication clears and whether normal operation returns. The Department of Energy’s consumer information describes dehumidification in relation to indoor conditions, but it does not define display codes for individual products. Product-specific interpretation belongs to the manufacturer’s manual or support channel.
If the exact manual does not explain a display, or the indication persists after its documented owner action, contact the manufacturer with the model and serial details. Include a photo, the exact text, whether the unit continues running, and what changed immediately before it appeared. State whether water collects and whether the bucket or drain setup is in use. This gives support specific evidence without assuming an internal failure. If the product appears on a CPSC dehumidifier recall notice, match the model information and follow the notice’s instructions. Stop operation if the appliance shows electrical damage, smoke, or a burning odor.
The display may be reporting a water collection condition rather than an equipment fault.
The model may be reporting a temporary operating cycle.
The meaning cannot be established from the available model-specific information.
Do not assume so. Code definitions and indicator behavior can differ by model; use the manual matching the full model number.
Record or photograph it first. A reset may clear useful evidence, and reset steps should come from the exact manual.
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
| Specification | Recorded value | Evidence |
|---|---|---|
| Rated water-removal capacity | 49.67 pints/day | CertificationENERGY STAR — Dehumidifiers dehumidifiers.csv; row 481; ENERGY STAR ID 4509977 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Connected capability | No | CertificationENERGY STAR — Dehumidifiers dehumidifiers.csv; row 481; ENERGY STAR ID 4509977 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Dehumidifier type | Portable Dehumidifier | CertificationENERGY STAR — Dehumidifiers dehumidifiers.csv; row 481; ENERGY STAR ID 4509977 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |