Midea MAD22C1AWS
Source model name: Dehumidifiers
Dehumidifier · US market · 41 owner topics
Midea MAD22C1AWS
Potential replacements. Compatibility is not guaranteed. Confirm the complete model, suffix, serial/version, diagram position and current part number with the seller or manufacturer before ordering. Seller links open their listings for current price, stock and returns.
We do not have a current, reviewed individual part suggestion for this model. Use the official lookup below with the full appliance label.
How these suggestions are reviewed · Seller links are unpaid. Specs & Parts does not sell these parts or guarantee fit, performance, or a repair outcome.
Specifications for MAD22C1AWS with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
Midea MAD22C1AWS is rated at 22.31 pints/day. This is removal over a day under the source test conditions, not the size of its bucket or an expected amount in every room. Compare room humidity, temperature, run time and whether collected water is staying in the bucket or leaving through a permitted drain. Different test standards must be reconciled before comparing pint ratings.
Check the exact model before buying a filter, bucket, hose, or pump accessory. Parts differ, and reusable mesh filters may have different care instructions from replaceable filters.
Category & symptom guidance
Before shopping, find the complete model number on the appliance label and use it in the manufacturer’s parts information. Product names and cabinet appearance are not enough to establish a match. A replacement filter can differ in shape or fit across related models, and a bucket that looks similar may not seat or trigger the same collection mechanism. Write down any suffix or revision shown on the label rather than shortening the model number. If the label is hard to read, photograph it without moving or opening the appliance. Keep the old part available for comparison, but use the maker’s model-specific listing as the basis for compatibility.
Some units use a reusable mesh air filter; others may specify a different replacement element or have a filter arrangement that is not user replaceable. The manual should say whether the filter can be washed, brushed, or replaced. A mesh appearance does not by itself establish that water cleaning is allowed, and an element that looks disposable should not be discarded until its replacement is identified. Inspect for tears, deformation, and poor fit. If cleaning is permitted, follow the stated method and dry the filter fully before installation. If the instructions identify a replaceable part, verify the exact part number instead of relying on generic dimensions.
A collection bucket is a functional part: its shape, seating points, and interaction with the unit’s bucket detection can vary. Match a replacement by model number and the manufacturer’s part reference, not by approximate capacity or external appearance. If your current bucket is damaged, note where it is cracked and whether it still sits in its normal position. Do not tape a leak or force a substitute bucket into the opening. If a replacement listing is unclear, provide the complete model number and a photo of the old bucket to the manufacturer or parts seller before purchase. This reduces the chance of ordering a component that cannot be installed correctly.
A drain hose and a pump accessory are not interchangeable assumptions across dehumidifiers. Some models permit gravity drainage through a specified hose arrangement; some offer a compatible pump accessory; others may not support that setup. Confirm availability and the correct connection for the exact model in its documentation. Check whether the listing identifies the hose, connector, or pump kit as compatible with your model, and whether the accessory is sold separately. Do not infer compatibility from a similar threaded end or a hose that physically attaches. If a pump is involved, follow the model’s installation directions and do not open the cabinet to adapt fittings.
Use the manual and the part’s visible condition to choose the next step. A washable filter with ordinary dust can be cleaned as instructed; a torn element or one listed as replaceable may need the specified replacement. A bucket with residue may need cleaning, while a cracked bucket needs a correct part or service. A hose that is intact but kinked may need external rerouting under the model’s instructions. Do not order consumables just because another owner’s unit uses them. If the manual does not describe a part as user removable, or the part will not release normally, stop and ask the manufacturer or a qualified service provider to identify the supported procedure.
Cleaning is the specified maintenance action, not automatic replacement.
The filter may no longer protect the airflow path as intended.
Physical resemblance does not establish that it will connect or drain correctly.
No. Filter type and fit vary; use the exact model’s manual and parts reference.
No. Confirm pump support and the compatible kit in documentation for your exact model.
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
| Specification | Recorded value | Evidence |
|---|---|---|
| Rated water-removal capacity | 22.31 pints/day | CertificationENERGY STAR — Dehumidifiers dehumidifiers.csv; row 463; ENERGY STAR ID 4512373 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Connected capability | No | CertificationENERGY STAR — Dehumidifiers dehumidifiers.csv; row 463; ENERGY STAR ID 4512373 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Dehumidifier type | Portable Dehumidifier | CertificationENERGY STAR — Dehumidifiers dehumidifiers.csv; row 463; ENERGY STAR ID 4512373 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |