Appliance & electronics support
Find your model numberAbout our sources
Product photo not available
Historical record

GE ADER30LP

Potential replacement parts

Dehumidifier · US market · 40 owner topics

GE ADER30LP

Parts to consider

Potential replacements. Compatibility is not guaranteed. Confirm the complete model, suffix, serial/version, diagram position and current part number with the seller or manufacturer before ordering. Seller links open their listings for current price, stock and returns.

We do not have a current, reviewed individual part suggestion for this model. Use the official lookup below with the full appliance label.

Continue with GE Appliances

Use the full model and version from your appliance label. This link opens the manufacturer’s parts or support site.

Open official parts or support lookup

How these suggestions are reviewed · Seller links are unpaid. Specs & Parts does not sell these parts or guarantee fit, performance, or a repair outcome.

GE dehumidifiers

Specifications for ADER30LP with owner checks for this product design. Use the matching manual for control sequences and replacement parts.

Specifications & model details

ADER30LP: model-specific checks

The company named in this model’s archive

GE ADER30LP is associated with GE Appliances, a Haier company in the original regulatory record. Use both the retail brand and this company name when researching an older manual, parts listing, or recall notice. This historical listing identifies the source relationship; the complete model and serial still determine a replacement part or service arrangement.

Identify the component by its exact model documentation, distinguish owner-accessible items from sealed internals, and confirm a part number before ordering.

Owner guide: Parts & components

Category & symptom guidance

Parts & components

Start with the complete model identification

A part that looks right may belong to a different revision or capacity of dehumidifier. Find the model and serial information on the unit’s identification label, using the location described in its manual if it is not obvious. Record the full model string, including suffixes, along with the serial number. Search the manufacturer’s parts diagram or support page using that information, then match the named component and part number. Similar product names are not enough: manufacturers can change buckets, filters, floats, and fittings between versions. If the label is unreadable, photograph it in good light and ask the manufacturer to identify the product before purchase. Keep the old part until the replacement is confirmed, because its markings or shape may help support staff clarify an uncertain listing.

  1. Record the complete model and serial from the appliance label.
  2. Use the manufacturer’s diagram or support channel to identify the named part and number.

Recognize the parts owners commonly handle

The bucket, removable air filter, and drain hose are often designed for owner access, but the manual determines what can be removed and how. A bucket may include a float or switch feature that signals when it is full; do not assume every visible float is sold separately or interchangeable. Filters can differ in dimensions, material, and frame shape even when they serve the same purpose. A drain hose may be a general accessory or a model-specific connector. Check the diagram’s part name and notes rather than ordering by appearance. The ENERGY STAR product information distinguishes portable and whole-home dehumidifier categories, which is useful context when searching documentation: a portable unit’s parts listing will not establish compatibility with a whole-home system.

  1. Compare the part’s name, diagram position, and part number with the exact model documentation.
  2. Treat a float as part of the bucket assembly unless the documentation lists it separately.

Understand where the drainage parts fit

A drainage setup may involve a hose, a bucket, or an optional pump, depending on the unit. The manufacturer’s support information for Frigidaire models, for example, asks owners to check the hose, pump, bucket, and model-specific arrangement when troubleshooting drainage. That is an example of why drainage parts should be identified against the appliance’s own instructions; it does not mean every brand or model uses the same setup. Confirm whether the hose connection is threaded, pushed on, or otherwise secured according to the parts diagram. If a pump is listed, verify whether it is built in or an accessory and whether its kit has a separate part number. Do not substitute a connector based only on a similar-looking outlet.

  1. Check the manual’s drainage diagram for the bucket, outlet, hose, and pump relationship.
  2. Write down each component’s listed part number before contacting a seller.

Keep sealed components in the service category

The cabinet can contain electrical controls, wiring, and a sealed refrigerant circuit. Those parts are not equivalent to an owner-removable filter or hose, and a parts illustration does not make internal repair an owner task. If a part requires opening the cabinet, disconnecting wiring, or disturbing sealed refrigerant lines, stop at identification and arrange qualified service. Do not try to identify compatibility from wire colors, connector shape, or a refrigerant label alone. A service provider can use the model and serial information to determine what the manufacturer supports and whether the component can be replaced safely. Keep the appliance unplugged while handling removable parts, following the manual’s directions, and avoid contact with any damaged electrical area.

  1. Use documentation to identify internal parts without opening the unit.
  2. Provide the model, serial, and observed symptom to the manufacturer or qualified service provider.

Check recalls as part of identification

Before ordering or reinstalling a component, check whether the exact product has a recall notice. CPSC recall listings identify affected dehumidifiers by model and serial information; a broad brand match is not sufficient to establish that your unit is included or excluded. Read the notice carefully and compare the listed identifiers with the appliance label. If they match, follow the remedy and contact instructions in that notice rather than continuing ordinary use or sourcing an unrelated replacement part. Keep a photo of the label and any purchase documentation available. For products not named in a recall, the manufacturer’s parts diagram remains the best source for supported replacement numbers and assembly details.

  1. Search the CPSC recall listing and compare exact model and serial identifiers.
  2. Follow the recall notice instructions if the identifiers match.

What to do with what you find

The part number in the exact model diagram matches the seller’s listing.

The documentation supports that replacement for the identified model, subject to any diagram notes or supersession details.

Confirm the part number and return terms with the seller before ordering.

The bucket or filter looks similar but its model listing cannot be confirmed.

Appearance alone does not establish fit or switch alignment.

Ask the manufacturer to cross-reference the full model and serial before buying.

The desired part requires removing the cabinet or disconnecting wiring.

The repair involves internal electrical or sealed components outside normal owner access.

Stop the disassembly and arrange qualified service using the model and serial information.

Have these details ready

  • Complete model and serial number
  • Photograph or diagram reference for the component
  • Existing part markings and dimensions, if accessible without disassembly
  • Manufacturer part number and any supersession note
  • Recall listing match, if applicable

Common questions

Can I use a filter from another brand if it has the same dimensions?

Dimensions alone do not confirm frame fit or material requirements. Use the exact model’s documented part number or obtain manufacturer confirmation.

General background sources

These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.

  1. owner.frigidaire.com/support-articles/article/1927766-dehumidifier-clean-and-care
  2. owner.frigidaire.com/support-articles/article/1927760-dehumidifier-not-draining

Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.

Recorded model facts

Model details relevant to this topic

SpecificationRecorded valueEvidence
Rated water-removal capacity30 pints/day
Archive
California Energy Commission — Dehumidifiers archive

cec-dehumidifiers.xlsx; sheet Dehumidifiers_12022025; row 20

Regulatory archive observation; test standard and measurement context follow the original record.

Observed Oct 27, 2026

Sources for ADER30LP

Suggest a correction