Coop PV21
Freezer · US market · 41 owner topics
Specifications for PV21 with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
For Coop PV21, the source gives width 32 in (812.8 mm), height 70 in (1,778.0 mm), depth 26 in (660.4 mm). Measure the narrowest doorway, turning space and final opening using those same directions. These are product measurements; add the separately specified hose, ventilation, door/lid, handle and service space. The reported width × depth occupies about 5.78 square feet before those allowances.
Coop PV21 is recorded as upright. Check the door swing, shelf or drawer seating, and packages projecting into the seal. For uneven cooling, keep the source-listed defrost design in view: airflow checks apply to a fan-cooled layout, while a manual-defrost layout has its own unloading and defrost procedure.
Measure the route, cabinet space, and door movement, then confirm clearances in the exact freezer manual.
Category & symptom guidance
Measure doorways, hallways, turns, stair openings, and the final approach to the installation area. Compare those measurements with the freezer’s shipping and cabinet dimensions in the exact product specification. Packaging can make the delivered unit wider or taller than the bare cabinet, so ask the seller or carrier for packed dimensions if the route is tight.
Check thresholds and corners as well as the narrowest opening. A freezer that fits the final space can still be impossible to turn into it. Do not assume that a unit can be safely tilted or laid down; use the manufacturer’s transport instructions for the exact model.
Measure the width, depth, and height of the intended location, then compare them with the freezer’s listed dimensions. Leave room for the cabinet to be positioned and leveled. An upright requires space for its door to swing and for you to stand in front of the shelves; a chest needs lid clearance above it and room to reach the basket and bottom of the compartment.
Measure handles and protrusions when they affect passage or nearby walls. A snug cabinet footprint is not enough if a lid strikes a shelf overhead or an upright door cannot open far enough to remove bins. Keep the manufacturer’s stated installation clearances separate from the room needed for everyday access.
Clearance requirements are model-specific. The Danby DUFM085A2BSLDD upright guide specifies 4 inches at the rear, 8 inches at each side, and 12 inches above for that model. Those figures must not be transferred to another Danby upright or to a chest freezer.
For another appliance, use its own manual and allow the airflow space it specifies. ENERGY STAR comparison information can help evaluate products, but it does not replace a manufacturer’s installation dimensions. If the manual gives separate guidance for ventilation, service access, or opening movement, account for each.
Check that the floor is firm and level enough for the freezer and its loaded weight. The Danby DUFM085A2BSLDD guide describes leveling legs for that upright; other models may use different feet or instructions. Use the method in the exact manual, especially if the door must close and seal reliably.
Think about what must remain reachable after installation: the receptacle, a drain fitting if the model has one, and the interior space needed to remove baskets. Upright shelves make access more visible but need door-swing room; chest freezers can be easier to place where a side-opening door would collide with something, but the lid needs overhead room.
A final fit check should include the full model’s dimensions, packaging route, required installation gaps, door or lid movement, and the location of the electrical outlet. Product pages and manuals may list different kinds of dimensions, so identify whether a figure describes the bare appliance, handle, or packaging before relying on it.
Compare freezer options by dimensions and energy information together. ENERGY STAR provides a way to compare freezer products, while manufacturer documentation supplies the fit details for a particular model. For an online order, confirm the exact model and delivery terms in the listing and order record.
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
| Specification | Recorded value | Evidence |
|---|---|---|
| Reported depth | 26 in | ArchiveCalifornia Energy Commission — Refrigerators archive cec-refrigerators.xlsx; sheet Table; row 51658 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |
| Reported height | 70 in | ArchiveCalifornia Energy Commission — Refrigerators archive cec-refrigerators.xlsx; sheet Table; row 51658 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |
| Reported width | 32 in | ArchiveCalifornia Energy Commission — Refrigerators archive cec-refrigerators.xlsx; sheet Table; row 51658 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |
Check whether each value describes the cabinet, overall product, or opening. Required clearances and door movement must come from the exact installation guide.
Open the fit checklist