Universal DF1IAH
Freezer · US market · 41 owner topics
Universal DF1IAH
Potential replacements. Compatibility is not guaranteed. Confirm the complete model, suffix, serial/version, diagram position and current part number with the seller or manufacturer before ordering. Seller links open their listings for current price, stock and returns.
We do not have a current, reviewed individual part suggestion for this model. Use the official lookup below with the full appliance label.
How these suggestions are reviewed · Seller links are unpaid. Specs & Parts does not sell these parts or guarantee fit, performance, or a repair outcome.
Specifications for DF1IAH with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
Universal DF1IAH is associated with Rheem Sales Company, Inc. in the original regulatory record. Use both the retail brand and this company name when researching an older manual, parts listing, or recall notice. This historical listing identifies the source relationship; the complete model and serial still determine a replacement part or service arrangement.
For Universal DF1IAH, the source gives width 24 in (609.6 mm), height 60 in (1,524.0 mm), depth 30 in (762.0 mm). Measure the narrowest doorway, turning space and final opening using those same directions. These are product measurements; add the separately specified hose, ventilation, door/lid, handle and service space. The reported width × depth occupies about 5.00 square feet before those allowances.
Universal DF1IAH is recorded as upright. Check the door swing, shelf or drawer seating, and packages projecting into the seal. For uneven cooling, keep the source-listed defrost design in view: airflow checks apply to a fan-cooled layout, while a manual-defrost layout has its own unloading and defrost procedure.
Verify substitute parts and accessories against the freezer’s full model number and manufacturer documentation before use.
Category & symptom guidance
Record the complete model number and serial number from the rating label before considering a substitute part. Note whether the appliance is a chest or upright and whether it is manual-defrost or frost-free. Suffixes can distinguish versions, so a match based on brand, capacity, or appearance alone may be unreliable. Use the manufacturer’s support page to locate documentation for the exact appliance and confirm the model identifier.
A compatibility claim should connect the proposed part number to the freezer’s model, ideally through a manufacturer catalog or written confirmation from support. If a retailer listing gives only a broad series name, ask the seller to verify the full identifier and the specific part. GE and Danby support pages are useful places to begin, but a general support page by itself does not establish that a substitute fits.
Check what the original part does and how it attaches before comparing substitutes. Compare the documented part number, dimensions, mounting points, connector type, and any required hardware. Similar appearance does not establish functional equivalence. For a kit, confirm that the package contains all pieces the manual requires and that the listed instructions cover the freezer’s exact model. If a critical detail is absent, seek manufacturer or qualified parts-seller confirmation.
Keep accessory fit separate from installation fit. A substitute may attach correctly but still be unsuitable for the freezer’s installation conditions or electrical requirements. Follow the model-specific manual for required location, leveling, clearances, and supply. Do not transfer dimensions from a different appliance: Danby’s DUFM085A2BSLDD upright guide specifies clearances for that named model, not a general standard for Danby uprights or chest freezers.
For parts associated with defrosting or drainage, first determine the freezer’s defrost design. Manual-defrost chest and upright models can have different drain arrangements; frost-free models operate differently. GE describes differences between chest and upright defrost systems and notes that older uprights may be manual or self-defrost. The appliance manual and its parts diagram should decide whether a drain plug, cap, adaptor, or hose belongs on that specific unit.
Use a source example only within its documented scope. The GE FCM5/FCM7/FCM9 guide describes manual-defrost chest freezers, while GE’s upright defrost article covers manual-defrost upright models and treats drain hardware as optional where equipped. Those sources do not confirm a substitute part for another series. If the original fitting is missing, identify the model and obtain the correct part number before attempting defrost or drainage.
Before ordering, compare the full model and part identifiers in the manufacturer information with those in the seller’s listing. Confirm whether a substitute is new or used, whether the listing includes the required hardware, and who pays return shipping if it proves incompatible. The FTC advises checking seller identity, return conditions, shipping charges, and total delivered cost for online purchases. Save the listing and any written fitment confirmation until installation is complete.
Be cautious of listings that promise a universal fit without naming the supported models or providing a verifiable part number. A compatibility statement should be specific enough to check against the freezer’s documentation. If a seller cannot confirm fit, contact the manufacturer with both identifiers or choose a part that the official catalog explicitly associates with the model. Do not modify a connector or mounting point to force a substitute into place.
If documentation confirms the substitute, follow the installation instructions written for that appliance and part. If the part affects electrical connections, drainage, or the sealed refrigeration system, stop if the manual does not describe owner installation and contact an authorized service provider. A substitute’s matching dimensions do not show that internal operation or safety requirements are equivalent. Keep the removed part and its label until the replacement is installed and working as intended.
If you are seeking a substitute because the freezer is malfunctioning, do not infer a component diagnosis from the symptom. Follow model-specific owner checks and use the manufacturer’s service route if the issue remains. GE’s general troubleshooting guidance identifies owner checks and directs service; it does not prove which component has failed. Provide the service provider with the complete model number, symptom, and any confirmed part identifiers to support an accurate assessment.
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
| Specification | Recorded value | Evidence |
|---|---|---|
| Freezer capacity | 12.1 cu ft | ArchiveCalifornia Energy Commission — Refrigerators archive cec-refrigerators.xlsx; sheet Table; row 69739 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |
| Total capacity | 12.1 cu ft | ArchiveCalifornia Energy Commission — Refrigerators archive cec-refrigerators.xlsx; sheet Table; row 69739 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |
| Anti-sweat heater switch declared in archive | False | ArchiveCalifornia Energy Commission — Refrigerators archive cec-refrigerators.xlsx; sheet Table; row 69739 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |
| Defrost type | Manual | ArchiveCalifornia Energy Commission — Refrigerators archive cec-refrigerators.xlsx; sheet Table; row 69739 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |
| Refrigerator configuration | Upright Freezer | ArchiveCalifornia Energy Commission — Refrigerators archive cec-refrigerators.xlsx; sheet Table; row 69739 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |