Home/Dishwashers/SDW6767HS/Power on, cycle not starting

Product photo not available

Public catalog

Sharp SDW6767HS

Power on, cycle not starting

Dishwasher · US market · 48 owner topics

Sharp Standard dishwashers

Specifications for SDW6767HS with owner checks for this product design. Use the matching manual for control sequences and replacement parts.

Specifications & model details

SDW6767HS: model-specific checks

What is recorded for SDW6767HS

Sharp SDW6767HS — Connected capability: No.

ENERGY STAR — Dishwashers

When the panel responds but washing does not begin, check the door, delay, lock, interruption, and selected cycle state in a controlled order.

Owner guide: Power on, cycle not starting

Category & symptom guidance

Power on, cycle not starting

4 minute read · Shared guidance for dishwashers

Confirm the machine is awake

A lit display or indicator shows that the control has some power, so begin with the start conditions rather than the household breaker. Note what is illuminated and whether the selected cycle appears on the panel. A control that wakes briefly and then goes blank is a different symptom; photograph any displayed code before it disappears.

Avoid pressing several pads rapidly or holding them in combinations not printed on the machine. A sequence can change options, lock controls, cancel a cycle, or start a delayed countdown. First identify the current state from the labels and the exact model’s instructions.

Photograph the lit controls and selected cycle.
Note whether any lock, delay, or status light is showing.
Do not experiment with undocumented multi-button holds.

Check latch and door clearance

Make sure a utensil, rack, or dish is not projecting into the door path. Push racks fully in and close the door normally; do not lean on it or slam it to force a latch. A loaded upper rack may be heavy, and rack position can affect whether the door closes squarely. Check the gasket edge for an object caught across it.

If the controls respond but the cycle starts only when the door is held or lifted, stop trying to compensate with pressure. That pattern suggests alignment or latch service. Do not defeat the latch or insert tools around it.

Look along the door perimeter for an obstructing item.
Ensure racks are fully seated and the door closes without force.
Stop if normal closure does not produce a secure latch.

Clear delay and control-lock states

A Delay Hours option can intentionally postpone washing while the panel remains on. Check whether a delay indicator or countdown is visible and cancel it only through the exact model’s documented method. Similarly, a control-lock light can block new selections. Locking mechanisms differ by brand and product family; a familiar-looking pad does not guarantee the same unlock action.

The GE shared manual describes different lock methods for its GE and Profile families, including an app-based route for some Profile controls. Those are narrow examples, not general instructions. Use the label and instructions for your exact machine, and confirm the lock indicator changes before selecting a cycle again.

Inspect the panel for delay countdown or lock indication.
Use the model’s documented cancel-delay or unlock procedure.
Verify the control state changed before pressing Start.

Start and resume in the right sequence

Some controls accept cycle selection with the door open but begin only after Start is pressed and the door is closed within a specified interval. GE’s GD*640–670 / PD*705–795 owner manual specifies four seconds for its covered models. Other machines may have a different start action or use a separate confirm control. Use the sequence printed on the panel or in the exact owner instructions, then listen for filling or another clear start indication.

If a cycle was interrupted by opening the door, the GE manual says Start and prompt door closure resume it. A flashing Start indicator in that manual’s troubleshooting table is tied to interruption. If you intended to cancel, the same manual uses a different action. Avoid cancelling repeatedly when the aim is to resume.

Select a cycle and follow the exact model’s Start and door-close sequence once.
If interrupted, use the documented resume action rather than cancelling.
Observe for a clear fill or wash start and note any new indicator.

Interpret a failed start by its pattern

If the controls remain lit, the door latches, and the machine does not begin, record whether it makes a fill sound, drains briefly, beeps, or shows a code. A brief drain or waiting period may be part of a model’s normal sequence, so compare with its instructions instead of relying on a fixed time estimate. If the same failure repeats at the same point, stop cycling through buttons and provide that sequence to support.

If the panel goes dark, a breaker trips, or the appliance smells hot, treat it as a power or electrical concern rather than a start-setting puzzle. Leave internal checks to qualified service.

Record sound, indicators, and whether water enters or drains.
Compare behavior with model-specific start guidance.
Escalate recurring failure or any electrical warning sign.

What to do with what you find

A delay or lock indicator is present and changes after the documented control action.

The dishwasher was held by a selected control state.

Choose the cycle again and use its exact start sequence.

Controls remain lit, door closes normally, but repeated correct starts produce no wash.

A latch, control, fill, or other system issue may need diagnosis.

Record the lights and sounds and request model-specific support.

Have these details ready

Panel indicators, selected cycle, delay or lock status, and exact response after Start.
Door closure behavior, sounds, and whether filling or draining begins.

Common questions

The panel is lit. Does that mean the dishwasher has started?

No. It may be waiting for Start confirmation, door closure, a delay countdown, or an unlocked control state.

Can I use a button combination from a similar dishwasher?

No. Control sequences differ, including within a brand. Use the instructions for the exact model.

General background sources

These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.

Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.

Recorded model facts

Model details relevant to this topic

Specification	Recorded value	Evidence
Maximum place settings	8	Certification ENERGY STAR — Dishwashers dishwashers.csv; row 435; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026
Connected capability	No	Certification ENERGY STAR — Dishwashers dishwashers.csv; row 435; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026
Drying method	Heated Dry	Certification ENERGY STAR — Dishwashers dishwashers.csv; row 435; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026
Soil-sensing capability	Yes	Certification ENERGY STAR — Dishwashers dishwashers.csv; row 435; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026
Product type	Standard	Certification ENERGY STAR — Dishwashers dishwashers.csv; row 435; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026
Tub material	Stainless Steel	Certification ENERGY STAR — Dishwashers dishwashers.csv; row 435; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026

Sources for SDW6767HS

ENERGY STAR — Dishwashers Observed Nov 01, 2026

Suggest a correction