What is recorded for SDW6767HS
Sharp SDW6767HS — Product type: Standard.
Product photo not available
Public catalog
Sharp SDW6767HS
Leaks, moisture & condensation
Dishwasher · US market · 48 owner topics
Sharp Standard dishwashers
Specifications for SDW6767HS with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
SDW6767HS: model-specific checks
Account for the recorded drying design
Sharp SDW6767HS lists Heated Dry for drying. Evaluate the result after the selected program finishes, considering rinse-aid instructions, load arrangement and plastics. Do not transfer a heated-dry, door-opening or fan-dry setting from another Sharp model.
Locate when and where moisture appears, distinguish normal post-cycle dampness from escaping wash water, and contain a leak before it reaches flooring or cabinetry.
Owner guide: Leaks, moisture & condensation
Category & symptom guidance
Leaks, moisture & condensation
Locate and time the moisture
Dry the accessible floor around the dishwasher and note where moisture returns: beneath the door edge, at a cabinet side, near the sink connection, or only as droplets on dishes after a cycle. A photo of the first wet area is more useful than a later image after water has spread. Record whether the leak begins during filling, spraying, draining, or after the machine stops.
Do not pull an installed dishwasher forward to inspect hidden hoses. Check only visible areas without removing panels, and keep people away from a slippery floor. If water is actively spreading, stop the cycle using the labeled control if safe to reach, then shut off the dishwasher’s water supply only if its valve is accessible without moving the appliance.
- Dry and mark the first visible wet point and time it appears.
- Observe from outside during a cycle only if there is no active unsafe leak.
- Contain spreading water and avoid moving the installed unit.
Separate condensation from escaping water
Moisture on dish surfaces or a damp interior after a cycle can be part of drying behavior, especially on machines that rely on residual heat or airflow rather than a dedicated heated dry. This is different from water escaping onto the floor. Check whether droplets are confined to the tub and dishes, whether the floor remains dry, and whether the pattern changes when the door is opened after completion if the owner guidance recommends it.
Some machines release the door automatically or use a fan; others do not. Do not assume a door-opening feature or imitate a control sequence from another model. If the cabinet face or countertop becomes wet, capture the location and timing because condensation from warm humid air may need different attention than a seal leak.
- Identify whether water is inside the tub, on dishes, on the door face, or on the floor.
- Note the drying method or feature only if the exact model’s documentation identifies it.
- Compare the same location after a later cycle rather than treating interior droplets as a floor leak.
Check door-area contributors
If wetness begins at the front, look for dishes, utensils, or detergent residue caught across the door seal or dispenser area. A large item can prevent proper closure or redirect spray. Re-seat the load and wipe accessible gasket surfaces with a soft damp cloth; do not stretch, pry, or apply sealant. Suds can also escape if hand dish soap or another non-automatic detergent was used. In that case, stop the cycle and follow the exact model’s cleanup instructions rather than adding more detergent or running repeated cycles.
A door that appears misaligned, a torn gasket, or water returning from the same edge after a corrected load is not solved by tightening visible screws at random. Keep a record of the leak point and arrange repair assessment.
- Inspect the accessible door edge and seal for trapped items or visible damage.
- Confirm only automatic dishwasher detergent was used.
- Correct loading, then observe once if there is no continuing leak or damage.
Document plumbing-side evidence
Water appearing near the sink cabinet or only during drain can point toward a drain connection or backup, while moisture during filling may suggest a supply-side issue. These patterns are clues, not diagnoses. If an air gap is fitted, a clogged one can affect draining; the cited GE manual notes that an air gap is a separate plumbing part and gives an owner cleaning procedure. Follow that procedure only when your installation and model instructions match, and do not dismantle plumbing you cannot identify.
Photograph visible drips without reaching into a wet cabinet near electrical equipment. Record whether the sink or disposer was used around the same time and whether water was already standing in the tub. A repair provider can use those observations to distinguish appliance leakage from a household drain problem.
- Note whether moisture coincides with filling, wash, or draining.
- Photograph visible connections from a dry, safe vantage point.
- If water is hidden behind cabinetry or the machine, leave access work to an appropriate repair professional.
What to do with what you find
Dishes and tub are damp but the floor and cabinetry stay dry.
This may reflect the machine’s drying method rather than a water leak.
Water returns at the same floor edge or spreads beneath the cabinet.
An active leak or plumbing issue is likely and can damage surrounding materials.
Have these details ready
- First wet location and cycle stage when it appears.
- Photos of visible moisture and whether water remains in the tub or sink drain area.
Common questions
Are wet dishes evidence of a leak?
No. Condensation or air drying can leave interior moisture. A leak means water is escaping onto the floor, cabinet, or another unintended surface.
Should I pull the dishwasher out to find a hose leak?
No. Record visible evidence and avoid moving an installed unit; hidden connections and wiring require appropriate access.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- images.salsify.com/image/upload/s---cICc_Tn--/5fb2828e0d05a23804bd46dc2e7fdb4e1117ef28.pdf
- www.bosch-home.com/us/owner-support/get-support/support-selfhelp-dishwasher-not-drying
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Maximum place settings | 8 | CertificationENERGY STAR — Dishwashers dishwashers.csv; row 722; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Connected capability | No | CertificationENERGY STAR — Dishwashers dishwashers.csv; row 722; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Drying method | Heated Dry | CertificationENERGY STAR — Dishwashers dishwashers.csv; row 722; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Soil-sensing capability | Yes | CertificationENERGY STAR — Dishwashers dishwashers.csv; row 722; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Product type | Standard | CertificationENERGY STAR — Dishwashers dishwashers.csv; row 722; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
| Tub material | Stainless Steel | CertificationENERGY STAR — Dishwashers dishwashers.csv; row 722; ENERGY STAR ID 2485663 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Oct 31, 2026 |
Sources for SDW6767HS
ENERGY STAR — Dishwashers Observed Oct 31, 2026
Suggest a correction