What is recorded for RT16A6195SR/AA
Samsung RT16A6195SR/AA — Icemaker: Yes.
Manufacturer sources
Samsung RT16A6195SR/AA
Consumable replacement
Refrigerator · US market · 44 owner topics
Samsung RT16A6195SR/AA
Parts to consider
Potential replacements. Compatibility is not guaranteed. Confirm the complete model, suffix, serial/version, diagram position and current part number with the seller or manufacturer before ordering. Seller links open their listings for current price, stock and returns.
We do not have a current, reviewed individual part suggestion for this model. Use the official lookup below with the full appliance label.
Continue with Samsung
Use the full model and version from your appliance label. This link opens the manufacturer’s parts or support site.
Open official parts or support lookupHow these suggestions are reviewed · Seller links are unpaid. Specs & Parts does not sell these parts or guarantee fit, performance, or a repair outcome.
Samsung refrigerators
Guidance for Samsung refrigerators. Check the feature and control descriptions against your model.
Specifications & model details
RT16A6195SR/AA: model-specific checks
Replace a refrigerator filter only after confirming the exact model and filter code, then follow the model-specific removal, installation, flushing, and leak checks.
Owner guide: Replace filters
Category & symptom guidance
Replace filters
Match the filter to the refrigerator first
Before opening a package, read the full refrigerator model number from the appliance and compare it with the filter code specified in the model’s manual or current manufacturer parts information. A filter that looks similar may attach differently or be intended for another configuration. If the manufacturer lists a superseding code, verify that the listing explicitly covers your model. Keep the old filter’s label for comparison, but do not treat its presence as proof it was correct.
Read the instructions supplied for that exact replacement. The release, insertion, or locking method is model-specific, so do not copy a procedure from a video about a different refrigerator. If the new package and manual disagree, pause and confirm the correct part with manufacturer support before proceeding.
- Confirm the complete model number and exact replacement code in manufacturer information.
- Compare the package instructions with the model manual before removing the existing filter.
Prepare for the documented removal method
Filter housings can be located and released in different ways. Use the precise instructions for your model, including any direction to relieve water pressure or turn off a supply. Do not assume a push, twist, or pull mechanism based on another appliance. Protect nearby food and surfaces from drips with a cloth or container only if that does not obstruct the documented procedure.
If the filter will not release as described, stop rather than applying force or tools. A stuck filter can indicate the wrong procedure, an incorrect part, or a condition that requires service. Keep track of the removed filter and any seals or pieces the manual says should be checked; do not discard them until the new filter has been installed and inspected.
- Follow only the manual’s specified water shutoff or pressure-relief preparation, if any.
- Use the described release method and stop if the filter resists or the housing appears damaged.
Install using the exact instructions
Use the orientation marks and insertion or locking sequence stated for the exact filter and refrigerator. Check that any included seal is present and undamaged if the instructions direct you to inspect it. Do not add lubricant, tape, or an extra gasket unless the manufacturer specifically directs it. Once installed, make the documented confirmation that the filter is seated; avoid improvising a test by over-tightening or forcing the housing.
If the filter does not seat in the stated position, remove it only as the instructions allow and recheck the code and orientation. A part that needs unusual force or leaves a gap may be wrong or incorrectly aligned. Do not operate the water dispenser based on a guess that the filter is fully engaged.
- Align the filter according to its markings and model instructions.
- Confirm the seating or locking condition described by the manufacturer; do not force a mismatch.
Flush only when and how instructed
Some filter instructions require flushing after installation; the amount and method can vary by filter and model. Follow the exact directions supplied for this combination. Do not apply a generic volume or duration borrowed from another brand. If the manual does not call for flushing, do not invent a procedure. Keep the area visible while following the instructions so you can notice leakage or an unexpected change in flow.
If water is discolored, contains particles, or does not run as the instructions describe, stop using it for drinking until you have checked the manufacturer’s guidance. The appearance alone does not identify the cause. Do not remove and reinstall repeatedly without a documented reason, because that may disturb the connection or seal.
- Flush the new filter only if the exact instructions require it, using their stated method.
- Observe the connection and output during the prescribed procedure for leakage or unexpected flow.
Check for leaks and update the reminder
After installation, inspect the filter housing and nearby cabinet floor while the water system is used as directed. Look for beads, a damp seam, or a growing wet area; dry the area first so new moisture is easy to identify. Recheck after the system has been used and later during ordinary observation. If the manual provides a filter indicator reset procedure, use it only after the correct filter has been installed. Resetting a reminder does not prove that the part is seated or leak-free.
Record the installation date and filter code. If water continues to appear, stop using the affected dispenser or ice function if the manual directs, and contact manufacturer support or a qualified technician. Do not keep tightening or dismantling a leaking housing without model-specific instructions.
- Dry the area and inspect the housing during and after the instructed water use.
- Reset an indicator only by the model-specific procedure, then record the replacement details.
What to do with what you find
The filter will not release using the manual’s stated method.
The procedure may not match, the filter may be wrong, or the housing may need service.
The new filter does not seat or lock as the manual describes.
The part may be incompatible or misaligned, so the water connection may not be secure.
A new wet seam or puddle appears around the housing after use.
The connection may be leaking despite an indicator reset or apparent installation.
Have these details ready
- Full refrigerator model number
- Exact filter code and current manufacturer compatibility information
- Model-specific removal, installation, and flushing instructions
- Visual leak inspection after installation
Common questions
Should I flush every refrigerator filter after replacement?
Only when the exact filter and model instructions require it, and only by their stated method.
Does resetting the filter indicator confirm correct installation?
No. Inspect the seating and housing for leaks independently; the indicator is only a reminder system.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Freezer Capacity (cu. ft.) | 4 cu. Ft. | ManufacturerSamsung US current manufacturer catalog Exact primary manufacturer SKU RT16A6195SR/AA; https://www.samsung.com/us/refrigerators/top-freezer/15-6-cu-ft-top-freezer-refrigerator-with-all-around-cooling-in-stainless-steel-sku-rt16a6195sr-aa Exact modelCode in manufacturer technical specification response. Primary source: https://www.samsung.com/us/refrigerators/top-freezer/15-6-cu-ft-top-freezer-refrigerator-with-all-around-cooling-in-stainless-steel-sku-rt16a6195sr-aa Observed Oct 30, 2026 |
| Refrigerator Capacity (cu. ft.) | 11.6 cu. ft. | ManufacturerSamsung US current manufacturer catalog Exact primary manufacturer SKU RT16A6195SR/AA; https://www.samsung.com/us/refrigerators/top-freezer/15-6-cu-ft-top-freezer-refrigerator-with-all-around-cooling-in-stainless-steel-sku-rt16a6195sr-aa Exact modelCode in manufacturer technical specification response. Primary source: https://www.samsung.com/us/refrigerators/top-freezer/15-6-cu-ft-top-freezer-refrigerator-with-all-around-cooling-in-stainless-steel-sku-rt16a6195sr-aa Observed Oct 30, 2026 |
| Total Capacity (cu. ft.) | 15.6 | ManufacturerSamsung US current manufacturer catalog Exact primary manufacturer SKU RT16A6195SR/AA; https://www.samsung.com/us/refrigerators/top-freezer/15-6-cu-ft-top-freezer-refrigerator-with-all-around-cooling-in-stainless-steel-sku-rt16a6195sr-aa Exact modelCode in manufacturer technical specification response. Primary source: https://www.samsung.com/us/refrigerators/top-freezer/15-6-cu-ft-top-freezer-refrigerator-with-all-around-cooling-in-stainless-steel-sku-rt16a6195sr-aa Observed Oct 30, 2026 |
Sources for RT16A6195SR/AA
Samsung US current manufacturer catalog Observed Oct 30, 2026
Suggest a correction