Potential replacements. Compatibility is not guaranteed. Confirm the complete model, suffix, serial/version, diagram position and current part number with the seller or manufacturer before ordering. Seller links open their listings for current price, stock and returns.
1 distinct part number · 1 part type
Handles, knobs & trim
Potential replacement · supplier-listed
Samsung DC64-03949A Decoration Cover Door;Dv90t5740bv,Abs,T2 OEM Part
Part number DC64-03949A
Catalog version: Exact catalog model DV25FG62B0BEA2; production/serial applicability remains unconfirmed.
Fit unconfirmed · check the full model, suffix and version.
Source & checks before ordering
Why it is shown: AppliancePartsPros names DC64-03949A in its own parts catalog for DV25FG62B0BEA2. Verify the complete model and the correct shelf, bin or component position before ordering.
Seller-listed potential replacement; not independently certified here by the appliance manufacturer.
Confirm the full model, suffix/version, serial restrictions, diagram position, side, dimensions, attachment points and current replacement number before ordering.
A part suggestion does not diagnose a fault or guarantee fit, performance or a repair outcome.
Exact catalog model DV25FG62B0BEA2; production/serial applicability remains unconfirmed.
Seller catalog names the complete model; serial/version applicability is unresolved. Verify label, diagram position, dimensions and attachment points.
How these suggestions are reviewed · Seller links are unpaid. Specs & Parts does not sell these parts or guarantee fit, performance, or a repair outcome.
Guidance for Samsung clothes dryers. Check the feature and control descriptions against your model.
Specifications & model details
DV25FG62B0BEA2: model-specific checks
Start with the source identity
Samsung DV25FG62B0BEA2 is the exact code in this catalog record. This topic should be evaluated for that code and dryers category. The original source record is linked below; unrecorded settings, dates and compatibility remain unknown.
Plan a dryer repair by documenting the symptom, identifying the exact appliance variant, and confirming the diagnosis and part before ordering.
Owner guide: Component replacement planning
Category & symptom guidance
Component replacement planning
4 minute read · Shared guidance for clothes dryers
Start with the failure pattern
Write down what the dryer does and when it happens: no start, interrupted cycle, unusual sound, poor drying, or a visible display message. Note whether the drum turns, whether heat is absent or excessive, and whether the condition changes between loads. These observations help distinguish a control or power issue from airflow, heating, or mechanical trouble. A component should follow a diagnosis; replacing the first part associated with a symptom can leave the underlying cause in place.
For poor drying, consider the whole air path before assuming a heater failure. In a vented dryer, lint buildup or a restricted exhaust route can reduce performance and create a hazard. Clean the user accessible lint screen as directed and look for an obvious crushed or disconnected section of external duct. Do not open the cabinet or probe internal electrical or gas components. If the dryer overheats, smells scorched, or the exhaust is obstructed beyond an accessible check, stop using it and arrange inspection.
Record the exact symptom and the conditions when it occurs.
Check user accessible lint and external vent conditions before discussing an internal part.
Keep any displayed code or indicator exactly as shown; do not infer a part from it.
Identify the dryer precisely
Use the complete model identifier from the rating label, including letters that distinguish gas from electric and any suffix. A model family name alone may cover different power sources, colors, production revisions, or accessory arrangements. For example, LG lists DLEX4000 as electric and DLGX4001 as gas in its family specification; that example does not establish parts for another LG family or a different suffix. Photograph the label for your own records and provide it to the parts counter or service provider.
Also note whether the appliance is vented, condenser, or heat pump, if known. Most of LG’s DLEX4000/DLGX4001 product information are explicitly vented; their ducting advice and vent kits do not apply automatically to a condenser or heat-pump design. The power source changes what a technician must consider in a heating diagnosis. Tell the provider the installation type and any recent changes, such as a moved dryer or replaced exhaust duct, so the diagnosis reflects the installation.
Read the full rating-label model and serial information without relying on a sales listing title.
State gas or electric and dryer design where known.
Describe recent installation changes that may affect airflow or supply.
Ask what the evidence supports
Request a plain-language explanation of the test or observation that points to the proposed component. Ask whether the finding rules out simpler causes, whether any related part or connector is included, and whether the technician expects to verify operation after replacement. A useful diagnosis connects the reported behavior to a result, rather than merely naming a commonly replaced item. If the evidence is uncertain, ask whether another check is needed before authorizing parts.
For an electric dryer, a heating complaint can involve the appliance, its supply, or exhaust conditions; for a gas dryer it can involve gas-side issues that require a qualified service person. Do not attempt live electrical measurements, cabinet disassembly, gas adjustments, or bypassing a safety device. A vented model’s airflow indicator, where equipped, is a clue to inspect the duct path, not proof that a specific internal component has failed.
Ask for the observed finding that supports each proposed part.
Ask what causes have been excluded and what result will confirm repair.
Keep electrical, gas, cabinet, and safety-device work with qualified service.
Confirm the part before purchase
Ask the seller or service provider to match the part against the full model and serial range and to confirm whether the number is current, superseded, or restricted to a particular revision. A photograph, dimensions, or a similar-looking listing is not enough to establish fit. Confirm whether the quote includes required fasteners, seals, or a kit, and whether the existing part can be returned if the model match proves wrong. Do not substitute a generic item where electrical rating, gas function, heat resistance, or safety role matters.
Before buying, compare parts cost with diagnosis, labor, travel, and any follow-up visit. A low part price may not reduce the total if installation or access is costly. Retain the written diagnosis and part number so the repair record can be compared with the invoice. Manufacturer support pages can help locate model-specific owner information and support channels, but a family specification sheet is not a parts catalog.
Obtain written part number and model/serial fit confirmation.
Clarify return rules and what small associated materials are included.
Compare the complete installed quote, not the part price alone.
What to do with what you find
A dryer runs but dries slowly, or airflow indication is present.
For a vented design, restricted exhaust is a plausible cause and does not prove a failed internal component.
Check user accessible lint and visible external duct; seek service if restriction or overheating persists.
A provider proposes a component without explaining a test result.
The cause and part fit have not yet been demonstrated to the owner.
Ask what finding supports the part and request model/serial fit confirmation before ordering.
Have these details ready
Full rating-label model and serial
Symptom pattern and displayed indicators
Written diagnosis and proposed part number
Installed quote including labor and follow-up terms
Common questions
Does a heating symptom prove the heater or burner has failed?
No. Supply, airflow, controls, and other causes can produce similar behavior. Ask what diagnosis supports the proposed repair.
Can I use a part listed for a similar model?
Only after the seller or service provider confirms fit for the complete model and serial range; appearance and family name are insufficient.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Earlier part references
These historical identifiers are separate from the reviewed suggestions above. Their original records have not been renewed for current shopping. Recheck any supersession or fit restrictions with the manufacturer.
Source-listed part or accessory
DC64-03949A
Samsung DC64-03949A Decoration Cover Door;Dv90t5740bv,Abs,T2 OEM Part
AppliancePartsPros names DC64-03949A in its own parts catalog for DV25FG62B0BEA2. Verify the complete model and the correct shelf, bin or component position before ordering. Exact catalog model DV25FG62B0BEA2; production/serial applicability remains unconfirmed.
