Miele TXF360WP
Clothes dryer · US market · 45 owner topics
Miele TXF360WP
Potential replacements. Compatibility is not guaranteed. Confirm the complete model, suffix, serial/version, diagram position and current part number with the seller or manufacturer before ordering. Seller links open their listings for current price, stock and returns.
We do not have a current, reviewed individual part suggestion for this model. Use the official lookup below with the full appliance label.
How these suggestions are reviewed · Seller links are unpaid. Specs & Parts does not sell these parts or guarantee fit, performance, or a repair outcome.
Specifications for TXF360WP with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
For Miele TXF360WP, the source gives width 23.46 in (595.9 mm), height 33.47 in (850.1 mm), depth 25.31 in (642.9 mm). Measure the narrowest doorway, turning space and final opening using those same directions. These are product measurements; add the separately specified hose, ventilation, door/lid, handle and service space. The reported width × depth occupies about 4.12 square feet before those allowances.
Miele TXF360WP explicitly lists heat-pump technology and Vented venting. Check its own lint-filter, heat-exchanger and condensate arrangements. Keep the water path and room conditions in the diagnosis alongside drying time; an exhaust-duct-only checklist misses those parts of the design. Confirm any apparently inconsistent venting declaration with the original manufacturer instructions.
Verify dryer substitutions against physical fit, power or fuel, exhaust design, controls, and documented accessory compatibility.
Category & symptom guidance
A dryer substitute can mean a replacement appliance, a part, an accessory, or a connection. Start by naming the item and the requirement it must meet. For an appliance, record the opening dimensions, door clearance, utility supply, vent or drain arrangement, and whether it must stack or sit on a pedestal. For a component, use the complete rating-label model and serial range. A matching brand, capacity, or cabinet width answers only part of the compatibility question.
Separate required features from convenient ones. A matching washer may support a coordinated installation or smart pairing, but a matching name does not prove stacking-kit fit or control interoperability. LG’s DLEX4000 family specification identifies WM4000 washer models as matches for that example; it does not establish compatibility with other generations or all functions.
Confirm whether the existing unit is vented, condenser, or heat pump. A vented dryer sends moist air through an exhaust duct; its replacement must work with the available route and approved installation. A condenser or heat-pump design handles moisture differently and may need a drain arrangement or periodic maintenance specified by that model. Do not treat a vent connection, wall opening, or old maintenance routine as proof that the new design uses the same setup. DOE explains that clothes dryers include different technologies with different energy use and operation.
Then compare gas versus electric supply. A gas dryer and an electric dryer can share exterior dimensions while requiring different utilities and installation work. Verify the home’s available connection and the product’s stated requirements before ordering. Do not rely on a retailer’s generic family page when the individual model suffix identifies the fuel source.
Measure the opening at its narrowest points and include depth for hoses, exhaust duct, plug, and door movement. Compare with the product dimensions and recommended clearances in the exact installation guide. A nominal 27-inch cabinet, for example, does not guarantee that a dryer can pass through a doorway or that its door clears a wall. Include stacked height and service access if the appliance will be enclosed or placed on a pedestal.
For stacking, require a kit approved for both appliance models. For side venting, confirm the particular model permits the intended direction and that the kit is listed for the fuel variant. For racks and pedestals, obtain the exact compatibility listing. A specification sheet can identify options, but the installation manual is the source for actual installation conditions.
If Wi-Fi, remote start, cycle notification, or washer-to-dryer pairing matters, verify the exact model’s feature list and current app requirements. A product family may include connected functions, but service availability, account setup, network conditions, and feature behavior can differ. Treat these as selection criteria to verify rather than assumptions that transfer with the brand. An app connection also does not establish that a replacement part or appliance will work with an older washer.
For a part substitution, ask the authorized parts source or repair provider to confirm whether a listed number supersedes the original for the full model and serial range. Ask whether the alternative changes electrical ratings, materials, mounting, or required companion parts. Do not choose a “universal” replacement based only on a matching shape when it has a heating, gas, control, or safety function.
Physical fit alone does not establish utility or installation compatibility.
Its electrical, mechanical, or safety suitability remains unknown.
Not necessarily. The moisture handling, installation needs, and maintenance differ; compare the exact installation instructions and site conditions.
No. Confirm a kit approved for both exact washer and dryer models and check combined dimensions.
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
| Specification | Recorded value | Evidence |
|---|---|---|
| Drum capacity | 4.1 cu ft | CertificationENERGY STAR — Clothes dryers dryers.csv; row 118; ENERGY STAR ID 4687114 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026 |
| Connected capability | Yes | CertificationENERGY STAR — Clothes dryers dryers.csv; row 118; ENERGY STAR ID 4687114 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026 |
| Heat-pump technology | Heat Pump | CertificationENERGY STAR — Clothes dryers dryers.csv; row 118; ENERGY STAR ID 4687114 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026 |
| Listed dryer features | Drum light,Filter cleaning indicator,Time remaining display,Wrinkle prevention option,Perfect dry sensor, Gentle option | CertificationENERGY STAR — Clothes dryers dryers.csv; row 118; ENERGY STAR ID 4687114 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026 |
| Product type | Electric Compact Vented 120V | CertificationENERGY STAR — Clothes dryers dryers.csv; row 118; ENERGY STAR ID 4687114 Certification dataset declaration; check manufacturer installation documents for fit and clearances. Observed Nov 01, 2026 |