Home/Washing machines/HWD1700DS/Poor performance

Product photo not available

Historical record

Haier HWD1700DS

Poor performance

Washing machine · US market · 48 owner topics

Haier washers

Specifications for HWD1700DS with owner checks for this product design. Use the matching manual for control sequences and replacement parts.

Specifications & model details

HWD1700DS: model-specific checks

What is recorded for HWD1700DS

Haier HWD1700DS — Compartment capacity: 2 cu ft.

California Energy Commission — Washing machines archive

Poor cleaning, residue, odor, and excess suds often respond to changes in loading, detergent, cycle, and maintenance. Diagnose the actual symptom before changing several things at once.

Owner guide: Poor performance

Category & symptom guidance

Poor performance

3 minute read · Shared guidance for washing machines

Name the performance problem

Separate visible soil left on fabric from detergent residue, lint transfer, color bleeding, odor, and clothes that remain too wet. Each points to a different combination of cycle choice, load size, product amount, water conditions, or drainage. Note whether the problem affects every load or only one fabric type or cycle.

Compare similar loads using the care labels and the washer’s intended cycle. A delicate cycle may clean gently but not provide the same wash action as a regular soil-removal cycle. Avoid adding more detergent as the first response; too much can cause suds and interfere with rinsing.

Tune loading and detergent

Load items loosely so water and wash action can reach them. On an agitator top-loader, avoid wrapping bulky articles tightly around the center post; on an impeller top-loader, distribute clothing around the wash plate. A front-loader needs room for tumbling, and overpacking can leave soil or detergent behind. Follow the garment care label, especially for items that are waterproof or water resistant.

Use detergent labeled for high-efficiency machines when the washer calls for it, and measure according to the detergent label and the washer’s load guidance. Reduce the amount for a small or lightly soiled load when the product instructions support that adjustment. Hard water, soft water, concentration, and load size can change the useful amount; there is no one dose that fits every household.

Match cycle and water expectations

Choose a cycle based on fabric and soil rather than the amount of water visible through a lid or window. HE washers are designed to use less water than conventional designs, so clothes may not be submerged during the wash. That alone does not show poor performance. If detergent is not dissolving well in very cold household water, review the product directions and choose a permitted temperature suited to the fabric.

For a top-load sensing washer, let the sensing phase finish before judging fill level. Whirlpool’s general sensing guidance explains that sensing can determine water needs based on load characteristics; the amount may appear lower than expected. That page is broad guidance, not a guarantee about every washer’s sensing behavior.

Address residue and odor systematically

If garments feel slick or show streaks, test a smaller measured detergent amount and avoid overloading. If lint transfer is the problem, separate lint-producing towels from lint-catching fabrics and check pockets before washing. For a front-loader, wipe the visible door seal and leave the door and dispenser open to air when the cycle is finished, if the household setup allows; follow the manual for cleaning and any maintenance cycle.

Change one factor at a time and compare a similar load. If performance worsens across balanced loads despite suitable detergent and cycles, or water remains in the machine, treat it as a possible fill, drain, or wash-action fault rather than continually adding products.

What to do with what you find

Poor results occur with overloaded or tightly bunched laundry.

Wash action and rinsing may be restricted by loading.

Try a smaller, loosely arranged load using a suitable cycle.

Suds or residue increase after adding extra detergent.

Excess detergent may be reducing rinse quality.

Measure a smaller amount consistent with product and washer directions.

Results remain poor across ordinary balanced loads and appropriate settings.

A recurring washer or household water issue may be present.

Compare whether filling, draining, or spin also behaves abnormally and seek diagnosis.

Have these details ready

Specific result: soil, residue, odor, lint, or wet clothes
Load size and fabric mix
Detergent type and measured amount
Cycle, temperature, and whether the symptom repeats

Common questions

Why is the water level lower than my previous washer?

Many high-efficiency washers use less water by design, and sensing models adjust fill to the load. Visible water level alone is not a reliable measure of cleaning performance.

Should I add more detergent if clothes are still dirty?

Not automatically. Excess detergent can create suds and residue. Check loading, soil-appropriate cycle, product directions, and dose before increasing it.

General background sources

These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.

Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.

Recorded model facts

Model details relevant to this topic

Specification	Recorded value	Evidence
Compartment capacity	2 cu ft	Archive California Energy Commission — Washing machines archive cec-washers.xlsx; sheet ClothesWashers_12022025; row 3064 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026
Suds-saving capability in archive	False	Archive California Energy Commission — Washing machines archive cec-washers.xlsx; sheet ClothesWashers_12022025; row 3064 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026
Unheated rinse option in archive	True	Archive California Energy Commission — Washing machines archive cec-washers.xlsx; sheet ClothesWashers_12022025; row 3064 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026
Washer controls	Automatic	Archive California Energy Commission — Washing machines archive cec-washers.xlsx; sheet ClothesWashers_12022025; row 3064 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026
Combination-unit declaration	Single drum w/Condensing dryer	Archive California Energy Commission — Washing machines archive cec-washers.xlsx; sheet ClothesWashers_12022025; row 3064 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026
Declared washer use	Residential	Archive California Energy Commission — Washing machines archive cec-washers.xlsx; sheet ClothesWashers_12022025; row 3064 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026
Washer axis	Horizontal	Archive California Energy Commission — Washing machines archive cec-washers.xlsx; sheet ClothesWashers_12022025; row 3064 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026
Washer type	Needs resolution	Archive California Energy Commission — Washing machines archive cec-washers.xlsx; sheet ClothesWashers_12022025; row 3064 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 Other observations retained: Front-Loading — California Energy Commission — Washing machines archive; cec-washers.xlsx; sheet ClothesWashers_12022025; row 711

Sources for HWD1700DS

California Energy Commission — Washing machines archive Observed Oct 27, 2026

Suggest a correction