What is recorded for SPLK10N01A
GE SPLK10N01A — Weights Dimensions Overall Width: 2.88 in; Weights Dimensions Overall Height: 0.62 in; Weights Dimensions Overall Depth: 2.88 in.
Manufacturer sources
GE SPLK10N01A
Delivery & moving
Clothes dryer · US market · 44 owner topics
GE dryers
Specifications for SPLK10N01A with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
SPLK10N01A: model-specific checks
Use these measurements for the first comparison
For GE SPLK10N01A, start with weights dimensions overall width 2.88 in, weights dimensions overall height 0.62 in, weights dimensions overall depth 2.88 in. Preserve those labels when comparing an opening or delivery route. Any handle/hinge allowances, clearances and adjustment ranges that the source does not establish remain additional checks.
Plan a dryer move around its fuel type, vent route, access dimensions, and manufacturer handling requirements. After delivery, verify connections and operation before relying on the appliance.
Owner guide: Delivery & moving
Category & symptom guidance
Delivery & moving
Identify the dryer before arranging the move
Read the model and serial label and determine whether the dryer is electric or gas. A standard electric vented dryer needs a suitable 240-volt branch circuit; a gas dryer needs its specified electrical supply and a gas connection. These are not interchangeable destinations. Tell the mover and installer the type, dimensions, and whether the unit is stacked or on a pedestal. For a condenser or heat-pump model, identify the drain or water-container arrangement and follow its own transport instructions; do not assume a vented-dryer setup applies.
A model number can also identify which manual and installation sheet apply. Use the full model suffix when looking up instructions, because products in a family may differ. LG’s DLEX4000/DLGX4001 specification sheet, for example, lists different electrical requirements for its electric and gas versions and different venting options. Those details describe that family only, not all dryers.
- Measure the appliance, doorways, turns, stair landings, and final position; include the door swing and any pedestal or stacking height.
- Check the destination’s circuit or gas provision, vent outlet location, and clearances before scheduling delivery.
- Ask the mover what preparation and upright-handling requirements apply to the exact model.
Prepare the old location safely
Empty the drum and lint filter, remove loose items, and secure doors or accessories as the product instructions direct. Before anyone disconnects a gas dryer, arrange for a person qualified to handle the gas connection. Do not pull a connected unit across the floor or use its door as a handle. An electric unit must be disconnected from its supply before moving; do not open a live connection or attempt wiring work as part of a routine move.
For a vented dryer, the exhaust duct will need to be disconnected and later reconnected without crushing, sharp bends, or an improvised route. A gas or electric vented dryer still needs outdoor exhaust as specified by its manual. Condenser and heat-pump designs collect or route moisture differently, so retain their drain pieces and follow the model’s transport directions rather than removing parts based on a vented-dryer assumption.
- Remove clothing and detachable accessories; keep the manual and any transport or installation parts with the appliance.
- Have the gas supply and electrical connection handled using the appropriate professional procedure.
- Protect floors and corners and keep the dryer upright if the model instructions require it.
Set up at the new home
Confirm the dryer stands on a firm, level surface and that its door can open fully. A vented model needs the correct exhaust path and unobstructed outlet; a condenser or heat-pump model needs the prescribed condensate container or drain arrangement and its ventilation clearances. Check the installation sheet for closet ventilation and spacing, since enclosed installations can trap heat and moisture. Do not cover an air opening or route exhaust into a wall, attic, crawlspace, or room.
Gas dryers require the correct gas type and secure connection; conversion or connection work belongs to a qualified installer. Electric dryers require the receptacle and circuit specified by the appliance. Never force a plug, adapt a circuit, or use an extension cord to make a mismatched location work. Keep the dryer accessible enough to inspect the vent or moisture system later.
- Compare the exact model installation instructions with the intended location and connections.
- Have the installer check that the exhaust or moisture route, clearances, and leveling match the appliance requirements.
- Keep packaging and accessories until the unit is confirmed installed and undamaged.
Check the first run and keep move records
Before drying a full load, make sure the installer has completed the required connection and commissioning checks. Run a small, suitable load and look for unusual vibration, rubbing, a gas odor, an electrical burning smell, or a warning indicator. If anything seems wrong, stop using it and contact the installer or manufacturer with the model and a description. A hot or damaged exhaust path can create a fire hazard; the CPSC advises keeping lint and combustible material away from dryers and maintaining the exhaust system.
Keep the delivery paperwork, installation receipt, model and serial information, and any notes about a changed vent route or connection. These records help distinguish a transport issue from an existing condition if a problem appears. If the dryer was moved to another address, update any connected app or account location only if needed for your own alerts; remote features depend on model and service.
- Inspect the exterior and door after delivery and note damage before signing or discarding paperwork.
- Confirm the first test load runs without unusual noise, movement, smell, or alerts.
- Save the installation details and report any suspected transport damage promptly.
What to do with what you find
The destination lacks the correct power or gas provision, or the vent/moisture route cannot meet the model instructions.
The dryer is not ready to install safely at that location.
A gas smell, damaged cord, crushed exhaust, or abnormal movement appears after delivery.
The unit may have a connection or transport problem.
Have these details ready
- Full model and serial label
- Destination connection and vent/drain details
- Delivery condition photos and installer notes
Common questions
Can a gas dryer be moved into an electric dryer’s place?
Only if the destination has the connection and vent arrangement required by the exact gas model. Have the location assessed before delivery; the appliance types do not share a universal connection.
Does every dryer need an outdoor exhaust duct?
No. Vented models exhaust outdoors; condenser and heat-pump models handle moisture differently. Follow the exact model’s installation instructions.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- gscs-b2c.lge.com/downloadFile?fileId=2yGdcTa7P2CJgWmTA
- www.lg.com/us/support/products/documents/DLEX4000_%20DLGX4001_%20Spec%20Sheet.pdf
- www.energy.gov/cmei/buildings/consumer-clothes-dryers
- www.cpsc.gov/Safety-Education/Safety-Guides/Home-Fire-Electronics-and-Electrical/Overheated-Clothes-Dryers-Can-Cause-Fires
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Weights Dimensions Overall Depth | 2.88 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_depth Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
| Weights Dimensions Overall Height | 0.62 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_height Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
| Weights Dimensions Overall Width | 2.88 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_width Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
| Exact listed model code | SPLK10N01A | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
| Manufacturer first distribution date | 2024-03-03 | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Explicit product_first_distribution_date in exact OEM primary SKU record; not a manufacturing year or import date. Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
Sources for SPLK10N01A
GE Appliances and LG current manufacturer product records Observed Oct 30, 2026
Suggest a correction