What is recorded for SPLK10N01A
GE SPLK10N01A — Weights Dimensions Overall Width: 2.88 in; Weights Dimensions Overall Height: 0.62 in; Weights Dimensions Overall Depth: 2.88 in.
Manufacturer sources
GE SPLK10N01A
Replacement appliances & fit
Dishwasher · US market · 48 owner topics
GE dishwashers
Specifications for SPLK10N01A with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
SPLK10N01A: model-specific checks
Use these measurements for the first comparison
For GE SPLK10N01A, start with weights dimensions overall width 2.88 in, weights dimensions overall height 0.62 in, weights dimensions overall depth 2.88 in. Preserve those labels when comparing an opening or delivery route. Any handle/hinge allowances, clearances and adjustment ranges that the source does not establish remain additional checks.
Plan a dishwasher replacement around the cabinet opening, connection locations, and the replacement unit’s exact installation requirements. Confirm fit before ordering or scheduling removal.
Owner guide: Replacement appliances & fit
Category & symptom guidance
Replacement appliances & fit
Measure the existing opening
Measure the cabinet opening’s width at the top, middle, and bottom; measure height from the finished floor to the underside of the counter at both sides; and measure depth from the back wall to the cabinet face. Record the smallest usable dimension. Include flooring that may sit beneath or in front of the appliance, and check whether trim, a face frame, or a nearby cabinet narrows the opening.
Measure the old dishwasher itself as a reference, but do not assume its dimensions establish the opening size or the new unit’s fit. A replacement may need a different clearance for leveling feet, hoses, power cord, insulation, or door movement. Use the chosen model’s installation instructions to compare the opening and clearances, not a generic size category.
Map the connections and route
Look beneath the sink and behind the current unit, if visible without moving or dismantling it, to understand where the water supply, drain hose, and electrical connection enter the installation area. Note which side they approach from and whether the shutoff or outlet is accessible. The replacement instructions specify acceptable connection placement and routing; a hose that reaches only by being kinked or stretched is not a suitable fit.
Check how the drain hose is routed and whether there is an air gap or another locally accepted arrangement. The GE shared manual explains that an air gap is not part of the dishwasher and that drain routing requirements are described in installation instructions. Requirements depend on the particular unit and local plumbing rules, so have the installer verify the planned arrangement rather than copying the old route automatically.
Check door, handle, and cabinet clearance
Compare the new door’s swing and handle projection with nearby drawers, cabinet pulls, islands, and walkways. A unit may fit the opening yet collide with a neighboring door or leave too little room to load the lower rack. Check whether the toe-kick and adjacent cabinet fronts align acceptably after leveling, and whether a thick floor finish changes the available height.
If the dishwasher has a drying design that opens the door automatically, confirm how far the door moves and whether the manufacturer specifies clearance around adjacent cabinetry. That behavior is not universal; use the exact model’s instructions. A product photo rarely shows the full door path or the clearance needed for hoses and cord behind the cabinet face.
Decide what transfers and what must be new
Do not assume the old mounting brackets, drain hose, water line, power cord, junction parts, or trim kit will fit the replacement. Compare the new unit’s included parts and installation directions with what is already present. Use only parts the manufacturer identifies for that exact model; similar appearance or a shared brand name does not establish compatibility.
Check whether the existing countertop and cabinet construction provide a permitted way to secure the new unit. The installation document may describe different attachment methods depending on the surrounding material. If the countertop is stone or another surface that cannot accept the illustrated fastener, follow the model’s approved alternative or ask the installer before purchase.
Coordinate removal and delivery
Before scheduling, ask the retailer or installer what must be disconnected, cleared, and accessible on delivery day, and whether old-appliance haul-away is included. Confirm whether the quoted work includes reconnecting the drain and water line, securing and leveling the unit, and checking for leaks and drainage after installation. Keep the written scope so add-on work can be distinguished from the appliance price.
If the old machine is stuck, leaks, or its connections are not accessible, describe that condition when arranging service. The installation team can then clarify what preparation is needed. Keep the new appliance’s packaging or delivery paperwork until the unit is confirmed undamaged and installed; if it arrives with visible damage or an incomplete parts package, document it and contact the seller before discarding material or starting installation.
What to do with what you find
The smallest opening measurement is below a candidate’s required installation dimension.
The unit may not fit safely or may not be installable as directed.
The old drain, water, or electrical arrangement differs from the replacement instructions.
Existing connections cannot be presumed reusable or properly routed.
Have these details ready
- Opening measurements at multiple points
- Chosen model’s installation instructions
- Connection locations and existing drain arrangement
- Written installation and haul-away scope
Common questions
Can I replace a dishwasher with any model listed as standard width?
No. Check the exact unit’s required width, height, depth, clearance, and connection routing against the measured opening.
Can the old drain hose be reused?
Only if the replacement instructions permit it, it is in suitable condition, and its length and routing meet the requirements.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- products.geappliances.com/appliance/gea-specs/GDT650SYVFS/support
- images.salsify.com/image/upload/s---cICc_Tn--/5fb2828e0d05a23804bd46dc2e7fdb4e1117ef28.pdf
- www.bosch-home.com/us/owner-support/get-support/support-selfhelp-dishwasher-not-drying
- www.epa.gov/recycle/what-you-can-do
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Weights Dimensions Overall Depth | 2.88 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_depth Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
| Weights Dimensions Overall Height | 0.62 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_height Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
| Weights Dimensions Overall Width | 2.88 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_width Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
A comparison group built from recorded designs
GE dishwashers
91 records in this manufacturer/public-source group. The group uses the brand, category and recorded design, rather than a guessed series or production year.
240.0–240.0 kWh/yearannual energy · 6 source values
2.88–23.75 width · 77 source values
2.88–25.38 depth · 77 source values
These are source-record ranges. They do not establish current availability, a shared repair platform or installation compatibility.
Put the source facts side by side
SPLK10N01A has 6 recorded specification fields. Compare the fields that matter for your space and use, then resolve gaps with the original documents. These are catalog candidates; fit, availability, and successor relationships have not been established.
Sources for SPLK10N01A
GE Appliances and LG current manufacturer product records Observed Oct 30, 2026
Suggest a correction