What is recorded for SPLK10N01A
GE SPLK10N01A — Weights Dimensions Overall Width: 2.88 in; Weights Dimensions Overall Height: 0.62 in; Weights Dimensions Overall Depth: 2.88 in.
Manufacturer sources
GE SPLK10N01A
Installation planning
Dishwasher · US market · 48 owner topics
GE dishwashers
Specifications for SPLK10N01A with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
SPLK10N01A: model-specific checks
Use these measurements for the first comparison
For GE SPLK10N01A, start with weights dimensions overall width 2.88 in, weights dimensions overall height 0.62 in, weights dimensions overall depth 2.88 in. Preserve those labels when comparing an opening or delivery route. Any handle/hinge allowances, clearances and adjustment ranges that the source does not establish remain additional checks.
Plan the work around the exact dishwasher’s installation instructions, cabinet opening, shutoff access, electrical supply, water connection, and drain route.
Owner guide: Installation planning
Category & symptom guidance
Installation planning
Confirm the model and scope
Before scheduling installation, confirm the full model number and locate its installation instructions. The owner manual explains operation; the installation document governs opening dimensions, mounting, connection routing, and setup. A shared manual may cover several related variants, so check that the chosen model is included and treat conditional features as model-specific.
Decide who is responsible for delivery, removal of the old unit, connection work, and disposal. Ask the seller what the installation service includes and what conditions create a separate charge. Keep the written scope with the order so that access, missing shutoffs, or cabinetry work are not discovered as an undefined task on installation day.
Prepare the space and access
Clear the route from the entry to the kitchen and remove items from the sink base and counter area. Measure the cavity, floor transition, and path before delivery. Note tight turns, stairs, fragile flooring, or a door that must be protected, then tell the delivery provider before the appointment.
Under the sink, identify whether the dishwasher has a reachable water shutoff and where the drain line can pass into the sink cabinet. The installer needs room to route and inspect connections. Do not fill the cabinet with stored items until the drain and supply paths have been agreed.
Resolve utility and drain questions first
Confirm that the kitchen has the electrical arrangement and water-supply connection required by the exact installation instructions. Existing wiring or a nearby outlet is not proof that the circuit, connection method, or location is acceptable. If the instructions or local requirements call for work beyond the installer’s stated scope, arrange that work before delivery.
Trace the sink-side drain arrangement: connection at a disposer or sink tailpiece, any air gap, and the high loop or routing specified by the instructions and local plumbing rules. If a disposer is being installed or replaced, determine whether its dishwasher inlet has been opened as required; the person doing that work should follow the disposer instructions. Do not run a new dishwasher until the drain path is confirmed.
Protect the cabinet and finish
Check the floor and cabinet for existing moisture damage before the old appliance is removed. Photograph staining, warped material, or a soft subfloor and discuss it before covering the area with the new unit. The dishwasher must sit level and be secured as its model instructions specify; uneven placement can affect door alignment and operation.
Ask how the installer will protect the floor and counter, handle the old appliance, and verify the door and racks after placement. For a custom front, obtain the exact panel template and mounting limits for the selected model before fabrication. Avoid ordering a panel from a similar-looking unit’s dimensions.
Agree on completion checks
Before the installer leaves, ask what checks were performed and where the water shutoff and electrical disconnect are. Confirm that the unit is stable, the door opens without rubbing, racks move freely, and the sink cabinet remains accessible. Ask for the installation instructions and any service or installation paperwork to be left with the appliance records.
Observe the first use for water at the sink cabinet, around the door, or on the floor, following the manufacturer’s directions for commissioning. If you see a leak, stop the cycle and have the installer address the connection. Keep the delivery and installation paperwork; it documents the work and can clarify responsibility if a connection issue appears later.
What to do with what you find
The model instructions, cavity measurements, and utility arrangements are confirmed before delivery.
The installation scope can be scheduled with fewer unresolved site conditions.
The shutoff, drain route, electrical arrangement, or cabinetry needs work outside the booked service.
The appliance installation depends on a separate site task.
Have these details ready
- Exact-model installation instructions
- Opening and delivery-route measurements
- Electrical and water connection details at the site
- Sink-side drain arrangement and installation service scope
Common questions
Does a dishwasher owner manual replace installation instructions?
No. Use the exact model’s installation instructions for fit, mounting, and connections.
What should I confirm with an installation service?
Clarify delivery access, old-unit removal, connection scope, cabinetry or utility exclusions, and what completion checks are included.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- products.geappliances.com/appliance/gea-specs/GDT650SYVFS/support
- images.salsify.com/image/upload/s---cICc_Tn--/5fb2828e0d05a23804bd46dc2e7fdb4e1117ef28.pdf
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Weights Dimensions Overall Depth | 2.88 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_depth Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
| Weights Dimensions Overall Height | 0.62 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_height Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
| Weights Dimensions Overall Width | 2.88 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU SPLK10N01A; https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Manufacturer storefront primary SKU SPLK10N01A; exact source field: spec_weights_dimensions_overall_width Primary source: https://www.geappliances.com/appliance/UNIVERSAL-SMARTHQ-LEAK-DETECT-KIT-SPLK10N01A Observed Oct 30, 2026 |
Sources for SPLK10N01A
GE Appliances and LG current manufacturer product records Observed Oct 30, 2026
Suggest a correction