What is recorded for PWE23KYNFS
GE Profile PWE23KYNFS — Weights Dimensions Overall Width: 35.75 in; Weights Dimensions Overall Height: 69.875 in; Weights Dimensions Overall Depth: 31.25 in; Capacity Total Capacity Cubic Feet: 23.10 cu ft.
Manufacturer sources
GE Profile PWE23KYNFS
Replacement appliances & fit
Refrigerator · US market · 44 owner topics
GE Profile French Door,Bottom Freezer refrigerators
Specifications for PWE23KYNFS with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
PWE23KYNFS: model-specific checks
Use these measurements for the first comparison
For GE Profile PWE23KYNFS, start with weights dimensions overall width 35.75 in, weights dimensions overall height 69.875 in, weights dimensions overall depth 31.25 in. Preserve those labels when comparing an opening or delivery route. Any handle/hinge allowances, clearances and adjustment ranges that the source does not establish remain additional checks.
Plan a refrigerator replacement by measuring the opening and route, checking the exact model drawing, and matching configuration and utility needs.
Owner guide: Replacement appliances & fit
Category & symptom guidance
Replacement appliances & fit
Measure the kitchen opening at several points
Before shopping, measure the refrigerator opening rather than relying on the old appliance’s name or nominal size. Record width at the top, middle and bottom; height at both sides; and depth from the back wall to the relevant cabinet or counter edge. Note trim, uneven walls and any cabinet lip that changes the usable space. A refrigerator may be narrower than the opening but still project into a walkway or prevent a nearby cabinet from opening. These are your observations, not manufacturer specifications. Keep them separate from the exact replacement model’s published dimensions. There is no universal standard that guarantees a replacement will fit: configurations, hinges, handles and installation requirements vary. If the opening is irregular or a dimension is close, remeasure and use the manufacturer’s drawing to determine whether the proposed model is suitable.
- Measure the opening at multiple points and note the surfaces used as reference.
- Record nearby counters, cabinets, walls and walkways that could affect access.
- Keep kitchen measurements distinct from product dimensions in your shopping notes.
Check doors, drawers and depth in use
A refrigerator’s closed depth does not tell you how it will work in the room. Find the exact model’s installation drawing and check how far doors, handles and drawers extend when opened, if those measurements are provided. Consider the swing direction and whether a wall or cabinet blocks a door from opening far enough to remove shelves or drawers. Check freezer access and the path to the kitchen table or island as well as the refrigerator itself. A listing photo cannot establish the full opening geometry. If the drawing does not show a needed open-door measurement, ask the manufacturer or seller for it; do not infer it from another model in the product family. Your decision should account for both the closed appliance footprint and the space needed to load food and clean removable parts.
- Review the exact model drawing for door swing, projection and drawer access.
- Measure nearby obstacles and the space needed to use the appliance.
- Ask for missing open-door dimensions when they affect your decision.
Walk the delivery route before ordering
Measure the route from the delivery entrance to the kitchen: doorways, halls, turns, stairs, elevator openings and the final approach. Record the narrowest clear width and height and any turn where the appliance must rotate. Ask the retailer what dimensions it uses to assess delivery and whether packaging affects passage. Do not assume that a refrigerator that fits the room can reach it. A route measurement also needs context: a doorway’s nominal width may be reduced by the door leaf, trim or a handrail. Keep route measurements in a separate list from the kitchen opening so a delivery team can review them. If the retailer cannot confirm passage from your information, ask for a site assessment or its written delivery requirements before purchase. That can prevent a late refusal or a change in the planned placement.
- Measure clear openings and tight turns along the entire route.
- Check whether measurements are with doors open and whether packaging dimensions matter.
- Have the retailer assess uncertain stairs, turns or narrow entries before scheduling delivery.
Verify utilities and configuration needs
Compare the replacement’s exact configuration with the utilities and features you need. If you want water or ice, confirm the specific model’s connection requirements and whether your kitchen has the corresponding supply point. Do not assume a water line is present or suitable just because the old refrigerator used one. Note the location of the electrical outlet and any installation constraints shown in the manufacturer’s materials; do not move or modify wiring yourself. Choose the freezer arrangement, dispenser and interior layout based on your routine rather than appearance alone. The replacement may offer a feature that requires additional installation work, or omit one you depend on. Ask the seller or manufacturer to resolve these points using the full model number. Keep each requirement as a checkable item so a sales description for a neighboring configuration does not quietly change your plan.
- List required compartment arrangement, dispenser and ice features.
- Confirm exact model utility requirements against the kitchen connection points.
- Refer electrical or water changes to an appropriately qualified professional.
Confirm the model drawing and protect food during the change
Before placing the order, compare your measurements with the installation drawing for the exact model and configuration. Check overall dimensions, door projection, required opening space and connection locations where the drawing supplies them. Ask the retailer to confirm any unresolved fit or delivery issue in writing. Plan what happens to food if the old refrigerator is removed before the replacement is ready. The FDA’s refrigerator guidance can help you plan safe food storage during an outage or move; keep a thermometer available and follow current food-safety guidance for time and temperature. If service or delivery causes an extended interruption, arrange suitable cold storage rather than assuming food will remain safe. Keep the old appliance operating until the delivery plan is firm when practical. Do not rely on a generic dimension or a photograph as final fit confirmation.
- Match kitchen and route measurements with the exact model drawing.
- Resolve uncertain installation, connection or delivery details with the retailer or manufacturer.
- Make a food storage plan for any gap between removal and setup, using FDA guidance.
What to do with what you find
The opening is wide enough, but the model drawing shows an open door projecting into a narrow walkway.
Closed dimensions alone do not establish practical fit.
The delivery route includes a tight turn not represented by a simple doorway width.
The appliance may not pass even if each straight opening appears adequate.
The replacement’s water or ice feature requires a connection that is absent or unverified in the kitchen.
The feature may require qualified installation work or may not be usable as planned.
Have these details ready
- Multi-point kitchen opening measurements
- Delivery route clearances and tight turn measurements
- Exact model installation drawing
- Water and electrical connection requirements
- Food storage plan for service or delivery downtime
Common questions
Can I assume a new refrigerator will fit if it has the same stated width as my old one?
No. Height, depth, door projection, hinge geometry, opening space and delivery route can differ. Compare the exact replacement drawing with your measurements.
How should I plan for food during a delayed replacement?
Arrange cold storage for the interruption and follow FDA refrigerator food-safety guidance, including use of a thermometer.
General background sources
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
- www.geappliances.com/ge/service-and-support/refrigerators-freezers.htm
- www.energy.gov/sites/default/files/2021-08/ES-KitchenAppliances_080221.pdf
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
Model details relevant to this topic
| Specification | Recorded value | Evidence |
|---|---|---|
| Capacity Total Capacity Cubic Feet | 23.10 cu ft | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU PWE23KYNFS; https://www.geappliances.com/appliance/GE-Profile-ENERGY-STAR-23-1-Cu-Ft-Counter-Depth-Fingerprint-Resistant-French-Door-Refrigerator-PWE23KYNFS Manufacturer storefront primary SKU PWE23KYNFS; exact source field: spec_capacity_total_capacity_cubic_feet Primary source: https://www.geappliances.com/appliance/GE-Profile-ENERGY-STAR-23-1-Cu-Ft-Counter-Depth-Fingerprint-Resistant-French-Door-Refrigerator-PWE23KYNFS Observed Oct 30, 2026 |
| Weights Dimensions Overall Depth | 31.25 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU PWE23KYNFS; https://www.geappliances.com/appliance/GE-Profile-ENERGY-STAR-23-1-Cu-Ft-Counter-Depth-Fingerprint-Resistant-French-Door-Refrigerator-PWE23KYNFS Manufacturer storefront primary SKU PWE23KYNFS; exact source field: spec_weights_dimensions_overall_depth Primary source: https://www.geappliances.com/appliance/GE-Profile-ENERGY-STAR-23-1-Cu-Ft-Counter-Depth-Fingerprint-Resistant-French-Door-Refrigerator-PWE23KYNFS Observed Oct 30, 2026 |
| Weights Dimensions Overall Height | 69.875 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU PWE23KYNFS; https://www.geappliances.com/appliance/GE-Profile-ENERGY-STAR-23-1-Cu-Ft-Counter-Depth-Fingerprint-Resistant-French-Door-Refrigerator-PWE23KYNFS Manufacturer storefront primary SKU PWE23KYNFS; exact source field: spec_weights_dimensions_overall_height Primary source: https://www.geappliances.com/appliance/GE-Profile-ENERGY-STAR-23-1-Cu-Ft-Counter-Depth-Fingerprint-Resistant-French-Door-Refrigerator-PWE23KYNFS Observed Oct 30, 2026 |
| Weights Dimensions Overall Width | 35.75 in | ManufacturerGE Appliances and LG current manufacturer product records Exact primary manufacturer SKU PWE23KYNFS; https://www.geappliances.com/appliance/GE-Profile-ENERGY-STAR-23-1-Cu-Ft-Counter-Depth-Fingerprint-Resistant-French-Door-Refrigerator-PWE23KYNFS Manufacturer storefront primary SKU PWE23KYNFS; exact source field: spec_weights_dimensions_overall_width Primary source: https://www.geappliances.com/appliance/GE-Profile-ENERGY-STAR-23-1-Cu-Ft-Counter-Depth-Fingerprint-Resistant-French-Door-Refrigerator-PWE23KYNFS Observed Oct 30, 2026 |
A comparison group built from recorded designs
GE Profile french-door refrigerators
18 records in this manufacturer/public-source group. The group uses the brand, category and recorded design, rather than a guessed series or production year.
725.0–725.0 kWh/yearannual energy · 3 source values
35.62–35.75 width · 14 source values
31.25–36.75 depth · 14 source values
These are source-record ranges. They do not establish current availability, a shared repair platform or installation compatibility.
Put the source facts side by side
PWE23KYNFS has 25 recorded specification fields. Compare the fields that matter for your space and use, then resolve gaps with the original documents. These are catalog candidates; fit, availability, and successor relationships have not been established.
Sources for PWE23KYNFS
GE Appliances and LG current manufacturer product records Observed Oct 30, 2026
Suggest a correction