Garrison 1028310
Dehumidifier · US market · 40 owner topics
Specifications for 1028310 with owner checks for this product design. Use the matching manual for control sequences and replacement parts.
Specifications & model details
Garrison 1028310 is the exact code in this catalog record. This topic should be evaluated for that code and dehumidifiers category. The original source record is linked below; unrecorded settings, dates and compatibility remain unknown.
Choose a drain hose, pump kit, condensate hose, or remote humidistat only when the exact model documentation confirms support and installation limits.
Category & symptom guidance
An accessory that appears in a retailer search may be intended for a different product family. Start with the exact model and serial, then check the manufacturer’s accessories page, manual, or parts diagram for the named kit. Confirm whether it is included, optional, or unsupported for that model. ENERGY STAR distinguishes portable dehumidifiers from whole-home products, so a control or drainage accessory listed for one category should not be presumed suitable for the other. A remote humidistat is especially model-dependent: documentation needs to state that the unit accepts one and explain its connection or pairing. Save the listing or manufacturer confirmation with the part number. A vague statement such as “fits most units” is not enough to establish compatibility.
A gravity hose works only when the unit’s drain arrangement and the route allow water to flow to a suitable destination. Confirm that the model provides a compatible drain outlet and whether the hose attaches directly or through a specified fitting. Plan the path from appliance to drain: a raised section, kink, or unsupported loop can hold water or interrupt flow. The destination should accept the condensate without creating a spill or directing water where it can damage flooring or property. Do not invent a hose length or slope requirement; follow the model instructions. If the drain is above the outlet or farther away than the documented hose arrangement allows, investigate a supported pump option rather than improvising an adapter.
A pump kit can move condensate where gravity drainage cannot, but only if the manufacturer supports the kit for the exact unit and the route stays within its stated limits. Verify the required kit number and any maximum lift or hose-routing information in the documentation; do not estimate from another pump’s rating. Plan where the discharge ends and make sure the route cannot spill onto an electrical connection or walking path. Some products have a built-in pump, some accept an accessory kit, and some offer neither. Confirm which applies before buying. If the instructions require opening the cabinet or making internal electrical connections, have the installation completed by qualified service rather than treating it as an ordinary hose attachment.
A hose’s nominal diameter may not describe the outlet connection. Threads, collars, seals, and connector shape can differ, and a hose that starts onto a fitting may still fail to seal or stay secure. Use the manufacturer’s specified hose or fitting and compare any listed measurements with the product you are buying. For condensate hoses on whole-home equipment, consult the system’s installation instructions and installer; the requirements may differ from a portable unit’s drain. Avoid cutting, stretching, or gluing an unverified hose to make it fit. If documentation is incomplete, ask the manufacturer to confirm the accessory part number and connection method before installation.
A remote humidistat can help control humidity at a location different from the appliance, but support and setup vary by model. Confirm the feature in the owner’s manual and determine whether the accessory is wired, wireless, or part of a control system. Check the stated placement and configuration instructions, and verify whether the unit changes operation when the remote reading is used. Do not infer compatibility from a shared brand name, a compatible-looking connector, or a retailer’s broad category. If the accessory is supported, keep its instructions with the appliance records and test the documented function. If the manual does not name the feature, contact the manufacturer before purchasing.
The manufacturer documents support for this installation on the identified model.
The outlet seal and attachment are still unconfirmed.
Support for that accessory has not been established for the unit.
No. Reach alone does not confirm outlet fit or routing support. Use the model’s specified hose and route it as the manual describes.
These sources support the shared guide. Exact model specifications and matched family procedures have their own sources above.
Owner guidance by Specs & Parts, drafted with GPT-6 Luna. Sources and scope.
Recorded model facts
| Specification | Recorded value | Evidence |
|---|---|---|
| Rated water-removal capacity | 30 pints/day | ArchiveCalifornia Energy Commission — Dehumidifiers archive cec-dehumidifiers.xlsx; sheet Dehumidifiers_12022025; row 441 Regulatory archive observation; test standard and measurement context follow the original record. Observed Oct 27, 2026 |