Accessories & installation kits

Choose a stand or arm by exact mounting details

A monitor arm must match the display’s VESA pattern, weight without stand, screw size, and screw depth. Check the monitor manual and arm rating; a screen diagonal does not prove mechanical compatibility. Confirm the clamp fits the desk thickness and that the desktop is strong enough for the arm’s leverage. Glass or hollow-core surfaces may need a different mounting solution.

If the monitor uses a recessed mount, the manual may specify a spacer. Use the correct screw length; a screw that reaches too far can damage internal parts. Do not modify a plate to make a near-fit work.

Select cables for the actual signal

Choose HDMI, DisplayPort, or USB-C based on the monitor and host specifications. Compare the desired resolution and refresh with both ports and the cable’s certified capability. USB-C supports different combinations of video, data, and power; check the host port and monitor manual. A charging cable may not carry video, and a cable that works at one mode may limit a higher refresh setting.

For a docked laptop, verify the dock’s output capability and upstream connection. If dropouts occur, test a known-good certified cable with a direct connection before replacing the monitor.

Add hubs, webcams, and audio devices deliberately

A monitor’s USB ports may require an upstream cable to the computer even when video is working. Confirm whether the monitor uses USB-B, USB-C, or a separate upstream input. Check power available at each downstream port before attaching a camera, drive, or phone. A USB hub port does not necessarily provide enough current for every device.

For speakers or headphones, identify whether audio comes from the computer, monitor, or dock. A monitor’s audio output may pass through the HDMI/DisplayPort signal and not operate when the source uses another connection. Check the monitor’s input and sound specifications.

Keep accessories identifiable

Label adapters and cables with the monitor model or workstation. Power bricks with matching plugs can have different ratings, and USB-C cables can have different data and charging capabilities. Store the mount hardware in a labeled bag, separated from desk screws. Retain receipts and packaging until the setup has been tested.

Before buying a replacement accessory, confirm compatibility with the exact model and keep the seller’s return terms. A photograph of a plug or stand does not establish its electrical or mechanical rating.

Check ergonomics and desk clearance

If the accessory is a riser, arm, or monitor light bar, check that it does not block the screen, camera, ambient-light sensor, or top ventilation. A light bar’s clamp must fit the cabinet without pressing the panel or controls. For a webcam, verify the monitor’s top bezel can support its clip and that the cable reaches a powered USB port. Consider the monitor’s height-adjustment range after the accessory is installed; added weight can change arm balance.

Plan cable slack through movement

Before tightening an arm’s cable clips, move the display through its full height, tilt, swivel, and portrait range. Confirm the HDMI or USB-C plug does not press into the wall and that the cable loop does not pull the monitor. Use a longer certified cable if necessary rather than stretching a lead to its limit. A cable that works while stationary can lose signal when the arm moves.